Help with bleeding my loop

[Dropndestroy213]

Hey guys im really not sure how i should b bleeding my loop thought i was doing it right but dont think i am. i added to videos if that helps
Im using  ek cryofuel acid green coolant.
these pictures are before i try to bleed the system 

https://youtu.be/eY1DrM1u8mE
https://youtu.be/fi2w9gW7fhU

 

 

 

[0ld_Chicken]

Try removing that air fitting on the top rad port and seal off the res before turning off the pump.  Seems like it is letting air back into the system between your fillport being open and possibly that allowing air back into the rad.  I haven't used that res but I would want it more full while it is running as it seems kinda close to the bottom

[Dropndestroy213]

1 hour ago, 0ld_Chicken said:

Try removing that air fitting on the top rad port and seal off the res before turning off the pump.  Seems like it is letting air back into the system between your fillport being open and possibly that allowing air back into the rad.  I haven't used that res but I would want it more full while it is running as it seems kinda close to the bottom

Thanks looks like that help. think i had a bad bottel of pre mix i flushed the system again and put another bottle in and looks alot better then before