Jump to content

As I was building my new desktop after getting of laptop unreliability, I put together the parts I purchased online.

Part list:

Intel core i5-7600k @3.5Ghz Quad-Core

Corsair VENGEANCE 2x8Gb DDR4 @3200Mhz

ASUS STRIX Z270E GAMING motherboard

Asus ROG STRIX-RX460-O4G-GAMING Graphics card

SeaSonic 360W 80+ Gold Certified ATX Power Supply

Western Digital 1TB 3.5" 7200RPM Internal Hard Drive

 

Description:

I went to turn on the computer, and it lit up.  I connected the HDMI cable to my monitor and… nothing. "No signal detected".  I made sure I was on the right input and checked the wire was in all the way. No beep code, and the CPU's fan wasn't running.

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/
Share on other sites

Link to post
Share on other sites

You plugged into the motherboard or the graphics card?

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9738540
Share on other sites

Link to post
Share on other sites

9 minutes ago, MetalBox47 said:

Motherboard

Try to plug it into the graphics card.

 

Also, please press the reply button on the bottom of a post to notify that person you replied to

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9738598
Share on other sites

Link to post
Share on other sites

Do you see the BIOS POST screen or any prompt to enter the UEFI? 

 

In the meantime, here are a few things you can try: 

 

1) Giving all the internal power connected a firm push to make sure they are 100% secured properly. 

 

2) Try a different monitor and a variety of different cables (HDMI, DVI, DisplayPort). Also try plugging two monitors (or TV) into the PC at the same time; make sure they are connected to the GPU. If that fails, try plugging them into the motherboard.

 

3) Reset CMOS on your motherboard. This can be done using the "RST CMOS" button on the IO shield, if your motherboard supports it. Another way is by removing the CMOS battery and leaving it out for 10 - 20 minutes and plugging it back in, this is usually the way to do it on older motherboards. 

 

Keep me posted!

 

 

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9738733
Share on other sites

Link to post
Share on other sites

23 minutes ago, Celios said:

Do you see the BIOS POST screen or any prompt to enter the UEFI? 

 

In the meantime, here are a few things you can try: 

 

1) Giving all the internal power connected a firm push to make sure they are 100% secured properly. 

 

2) Try a different monitor and a variety of different cables (HDMI, DVI, DisplayPort). Also try plugging two monitors (or TV) into the PC at the same time; make sure they are connected to the GPU. If that fails, try plugging them into the motherboard.

 

3) Reset CMOS on your motherboard. This can be done using the "RST CMOS" button on the IO shield, if your motherboard supports it. Another way is by removing the CMOS battery and leaving it out for 10 - 20 minutes and plugging it back in, this is usually the way to do it on older motherboards. 

 

Keep me posted!

 

 

I checked the cords, they are all firmly in place.  Strangely enough, there is no CMOS button or battery. I even checked the mobo manual.

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9738836
Share on other sites

Link to post
Share on other sites

4 minutes ago, MetalBox47 said:

I checked the cords, they are all firmly in place.  Strangely enough, there is no CMOS button or battery. I even checked the mobo manual.

 

30 minutes ago, Celios said:

Do you see the BIOS POST screen or any prompt to enter the UEFI? 

 

In the meantime, here are a few things you can try: 

 

1) Giving all the internal power connected a firm push to make sure they are 100% secured properly. 

 

2) Try a different monitor and a variety of different cables (HDMI, DVI, DisplayPort). Also try plugging two monitors (or TV) into the PC at the same time; make sure they are connected to the GPU. If that fails, try plugging them into the motherboard.

 

3) Reset CMOS on your motherboard. This can be done using the "RST CMOS" button on the IO shield, if your motherboard supports it. Another way is by removing the CMOS battery and leaving it out for 10 - 20 minutes and plugging it back in, this is usually the way to do it on older motherboards. 

 

Keep me posted!

 

 

I take that back, I found the CMOS battery. Didn't work though.

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9738856
Share on other sites

Link to post
Share on other sites

1 hour ago, MetalBox47 said:

 

I take that back, I found the CMOS battery. Didn't work though.

So do you see the BIOS splash screen when you start your PC? 

 

Did you try out another monitor or TV, and different cables?

 

Also, since the CPU fan isn't working and based on other things you have said, we could be looking at a faulty piece of hardware. Most likely the PSU or motherboard, could also be the GPU. 

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9739099
Share on other sites

Link to post
Share on other sites

7 hours ago, Celios said:

So do you see the BIOS splash screen when you start your PC? 

 

Did you try out another monitor or TV, and different cables?

 

Also, since the CPU fan isn't working and based on other things you have said, we could be looking at a faulty piece of hardware. Most likely the PSU or motherboard, could also be the GPU. 

There is no BIOS splash and I tried two other monitors and a tv but still no video output.  I did get around to replacing the mobo, and didn't have luck there either. 

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9740174
Share on other sites

Link to post
Share on other sites

2 hours ago, MetalBox47 said:

There is no BIOS splash and I tried two other monitors and a tv but still no video output.  I did get around to replacing the mobo, and didn't have luck there either. 

Hmm, okay - so it's most likely not the motherboard. Can you try a different PSU and GPU?

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9740620
Share on other sites

Link to post
Share on other sites

On 26/04/2017 at 10:36 PM, MetalBox47 said:

Does this mean anything?

IMG_0444.JPG

Hmm, sorry - I honestly wouldn't know. 

 

Can you try taking it into a local PC store and ask them to try a different PSU or GPU? Sometimes if you have the money it's best to take the easy route out.

Link to comment
https://linustechtips.com/topic/771665-no-computer-video-output/#findComment-9748667
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×