ASUS Maximus VIII Hero i7 7700k QCode 62

[lottalava]

Hello folks, i built my new computer and after power on this result in a QCode 62 and nothing happen, no screen in my monitor and i not using a graphics card on the MOBO, only on board for now, what i could did wrong to result into this?

[RS2007GOD]

12 minutes ago, lottalava said:

Hello folks, i built my new computer and after power on this result in a QCode 62 and nothing happen, no screen in my monitor and i not using a graphics card on the MOBO, only on board for now, what i could did wrong to result into this?

The z170 board require bios update to use kabylake chips

[lottalava]

Thanks for you response i will look for this, but i was looking in the manual and PCH Configuration as the QCode 62 relies on, is something with the SATA Devices, could also i put the wrong device in the wrong SATA port?

 

I have a SSD card on SATA 1 and two Barracuda hard drives in SATA 3 and SATA 5 and a DVDRW in SATA E1.

 

SATA 1 to SATA 6 are SATA Express and SATA E1 and SATA E2 are normal.

[RS2007GOD]

Not sure on that man but if your board hadn't had the bios update I'd do that first. I'm not exactly sure how to do it either without a working CPU.

 

Could try to Remove all drives apart from boot device and see if it posts. If you can get to the bios I'd strongly suggest checking the bios version and make sure its kaby compatible so you don't damage anything by mistake.

[lottalava]

Hello, i tried to flashback update the BIOS, but seems that this feature is not enabled yet at that time on post. I pressed and holded this button for 1min and nothing happened, no blinking blue light.

 

I tried also remove all SATA devices and nothing happened and as last resource removed the memories, even there's no errors with them. No success.

 

The QCode 62 persists.

[lottalava]

Hey, i figured out how to do properly the flashback update, we must do it with the machine powered to the PSU but not starting the computer!

 

I mean, with the computer with only the MOBO leds flashing.

 

Them i inserted my usb stick and started the flashback update, after that the computer booted normally .

 

I´ve already installed the win10 and now i beginning to install the ubuntu.

 

Thanks a lot!