Pc not bootin again please help

[jjohnthedon1]

So I was getting wierd temps 

68 in one core and 79 on another  set full load, I took the cooler off and reapplied paste under the ihs and then on top of the ihs 

turned pc on, no boot but cpu light is on on my mother board all the fans spinning etc 

 

i can can not have damaged anything I was supper carful 

 

please help me trouble shoot,

i have rest cmos I think and pressed the bios reset button on the back of the board and it's still the same 

[airdeano]

reconnected the 8-pin PSU harness?

[jjohnthedon1]

25 minutes ago, airdeano said:

reconnected the 8-pin PSU harness?

What's that ? 

U mean I should take the 8 pin out and put it back in ? The big 8 pin thing at the top left of the CPU socket ?

[jjohnthedon1]

1 hour ago, airdeano said:

reconnected the 8-pin PSU harness?

 What do you mean please 

[airdeano]

yes, the 8-pin EPS connector (the one that is usually in the upper left corner).

[smokefest]

3 hours ago, jjohnthedon1 said:

So I was getting wierd temps 

68 in one core and 79 on another  set full load, I took the cooler off and reapplied paste under the ihs and then on top of the ihs 

turned pc on, no boot but cpu light is on on my mother board all the fans spinning etc 

 

i can can not have damaged anything I was supper carful 

 

please help me trouble shoot,

i have rest cmos I think and pressed the bios reset button on the back of the board and it's still the same 

Only need to put thermal paste on the CPU, no need to put on the heatsink.

 

Recoinnect CPU power as stated by airdeano,

 

Also maybe try re-seat RAM

[jjohnthedon1]

9 hours ago, smokefest said:

Only need to put thermal paste on the CPU, no need to put on the heatsink.

 

Recoinnect CPU power as stated by airdeano,

 

Also maybe try re-seat RAM

It's delidded so I had to do under and on top of the ihs

[jjohnthedon1]

9 hours ago, airdeano said:

yes, the 8-pin EPS connector (the one that is usually in the upper left corner).

Tried it and still nothing

[Teddy07]

did you double check if you connected all cables correctly? I for example often forgett the cpu power cable

[tom_w141]

Did you check for physical damage after delidding? The adhesive intel uses between the die and ihs is dog shit so I understand why you'd delid but still risky! 

[jjohnthedon1]

1 hour ago, tom_w141 said:

Did you check for physical damage after delidding? The adhesive intel uses between the die and ihs is dog shit so I understand why you'd delid but still risky! 

Well long story short I dropped the CPU after delid and broke off 4 capacitors 

but a shop repaired them for me and it had been working since