H110M-DGS no post

[ChalkChalkson]

I set about to build a very simple PC, just a g4560, a relatively cheap h110, from asrock. It is not my first build by any means thus I thought it might go flawlessly, but here I am now. I don't get a post and there is no power on the USB ports, but the fans spin up. This is strange. Any ideas? I can't really wait for a replacement of every single part, so I can pretty much only try to swap one part. I do not own an accessible GPU or a Kabylake/Skylake chip however, since my main system is a custom loop.

Any ideas how to go about?

[PenPoint]

The very first possible circumstance is BIOS of the mobo hasn't been upgraded to the Kaby-supported one. To check this out, you must get any kind of Skylake CPU from somewhere.

[Zusafek]

3 minutes ago, ChalkChalkson said:

I set about to build a very simple PC, just a g4560, a relatively cheap h110, from asrock. It is not my first build by any means thus I thought it might go flawlessly, but here I am now. I don't get a post and there is no power on the USB ports, but the fans spin up. This is strange. Any ideas? I can't really wait for a replacement of every single part, so I can pretty much only try to swap one part. I do not own an accessible GPU or a Kabylake/Skylake chip however, since my main system is a custom loop.

Any ideas how to go about?

Pretty sure your going to need a skylake chip to get it to boot so you can update the bios. 

[ChalkChalkson]

i guess ill open up my loop then. Thanks anyway!

[ChalkChalkson]

It worked, thanks guys!