Jump to content
On 1/6/2017 at 1:43 PM, Lurick said:

It can wreck folding@home and a power bill at the same time :D

actually - not great at folding. http://www.crazy-logic.co.uk/archives/795 yeah it'll do a WU in 2 hours but.... 

 

ppd/power
the M600 server blade 23000/8.64kWh = 2662 points/kWh,
the QC Core 2 Quad 6500/2.62kWh = 2480 points/kWh,
the QC with 750Ti 38000/3.6kWh = 10500 points/kWh.

On 1/6/2017 at 2:44 PM, aubryscully said:

Forreal. I wonder what kind of power it would draw at full load

urm.... fully loaded, lots. Each blade is 360W and the fans on with 4 blades funning full pelt is ~800W 

it has 6 PSU slots, each can be 2.3kW or 2.7kW i think, and i've got 4 installed. You can run all 16 blades off 3 PSU's. But the chassis has some power budgeting functions so if you loose PSU's you can do funky stuff like kill blades in a set order or reduce the power allocation to the blades i think. 

On 1/8/2017 at 0:09 AM, Napalm360 said:

Please get a server rack soon as possible. It pains me to see that beauty on the floor

 

I have one - but this needs a 1m deep rack, which i don't have. hey - i put it on its own wheel board not to scratch it ;) 

On 1/8/2017 at 11:57 AM, Lurick said:

Sounds about right. Should make a good whole home heater :D

i actually use it to head my workshop from 6 to 22 deg (Deg C) with 3-4 blades running for an hour full pelt folding. 

8 hours ago, Windspeed36 said:

Yeah I've got a similar problem - got a fully populated IBM blade chassis with I think 14 blades sitting on a pallet that I can't spin up due to the 3 x 15Amp power feeds that it wants. Needs about 7.3KW at full load.

yeah i have it hooked upto a 32a circuit, but I calculate around 7-8KW on full load.

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9210616
Share on other sites

Link to post
Share on other sites

On 1/16/2017 at 7:37 AM, Jarsky said:

 

I just had a flash back to 2000! I had that case for my desktop at the time (Pentium II) - I believe it was made by Hyena. 

 

I have several of those cases. They are quite nice.

 

I also have three of the ones LinusTechTips used in his "Rebuilding first PC" video.

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9217593
Share on other sites

Link to post
Share on other sites

30 minutes ago, MrStraightface said:

adorable

PANO_20170117_163802.jpg

I like that Dell Dimension sitting down there. Is it still in any kind of use?

Main System: Phobos

AMD Ryzen 7 2700 (8C/16T), ASRock B450 Steel Legend, 16GB G.SKILL Aegis DDR4 3000MHz, AMD Radeon RX 570 4GB (XFX), 960GB Crucial M500, 2TB Seagate BarraCuda, Windows 10 Pro for Workstations/macOS Catalina

 

Secondary System: York

Intel Core i7-2600 (4C/8T), ASUS P8Z68-V/GEN3, 16GB GEIL Enhance Corsa DDR3 1600MHz, Zotac GeForce GTX 550 Ti 1GB, 240GB ADATA Ultimate SU650, Windows 10 Pro for Workstations

 

Older File Server: Yet to be named

Intel Pentium 4 HT (1C/2T), Intel D865GBF, 3GB DDR 400MHz, ATI Radeon HD 4650 1GB (HIS), 80GB WD Caviar, 320GB Hitachi Deskstar, Windows XP Pro SP3, Windows Server 2003 R2

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9218716
Share on other sites

Link to post
Share on other sites

42 minutes ago, MrStraightface said:

naw, that is my father in law's PC.  it barely boots.

Oh. I have kind of a soft spot for them. They aren't too bad.

Main System: Phobos

AMD Ryzen 7 2700 (8C/16T), ASRock B450 Steel Legend, 16GB G.SKILL Aegis DDR4 3000MHz, AMD Radeon RX 570 4GB (XFX), 960GB Crucial M500, 2TB Seagate BarraCuda, Windows 10 Pro for Workstations/macOS Catalina

 

Secondary System: York

Intel Core i7-2600 (4C/8T), ASUS P8Z68-V/GEN3, 16GB GEIL Enhance Corsa DDR3 1600MHz, Zotac GeForce GTX 550 Ti 1GB, 240GB ADATA Ultimate SU650, Windows 10 Pro for Workstations

 

Older File Server: Yet to be named

Intel Pentium 4 HT (1C/2T), Intel D865GBF, 3GB DDR 400MHz, ATI Radeon HD 4650 1GB (HIS), 80GB WD Caviar, 320GB Hitachi Deskstar, Windows XP Pro SP3, Windows Server 2003 R2

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9222632
Share on other sites

Link to post
Share on other sites

16 minutes ago, Crazy-Logic said:

I actually liked some the older dell case designs. 

I like the Dell OptiPlex cases from around 2008. hey aren't bad, but are limited due to being BTX.

Main System: Phobos

AMD Ryzen 7 2700 (8C/16T), ASRock B450 Steel Legend, 16GB G.SKILL Aegis DDR4 3000MHz, AMD Radeon RX 570 4GB (XFX), 960GB Crucial M500, 2TB Seagate BarraCuda, Windows 10 Pro for Workstations/macOS Catalina

 

Secondary System: York

Intel Core i7-2600 (4C/8T), ASUS P8Z68-V/GEN3, 16GB GEIL Enhance Corsa DDR3 1600MHz, Zotac GeForce GTX 550 Ti 1GB, 240GB ADATA Ultimate SU650, Windows 10 Pro for Workstations

 

Older File Server: Yet to be named

Intel Pentium 4 HT (1C/2T), Intel D865GBF, 3GB DDR 400MHz, ATI Radeon HD 4650 1GB (HIS), 80GB WD Caviar, 320GB Hitachi Deskstar, Windows XP Pro SP3, Windows Server 2003 R2

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9223189
Share on other sites

Link to post
Share on other sites

My small production setup.  Colocated since I can't deal with this much noise.  Plus I have a gigabit connection..

 

Juniper SRX240

Cisco 2960G

 

Supermicro Twin2 quad-node 2U w/ 2x E5620 + 96GB ram each.

Supermicro 2U storage 2U w/ 2x E5-2620 + 64GB ram 12x2TB Seagate Constellations

 

The other gear is my buddy's who I share some space with.

 

20160726_210825_zpsaxquwjpg.jpg

20160726_210936_zpsho43xplx.jpg

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9225109
Share on other sites

Link to post
Share on other sites

12 hours ago, Nachoi said:

Juniper SRX240

BOO!!!

 

12 hours ago, Nachoi said:

Cisco 2960G

Yay!

 

 

Lol, I had to :P , overall, nice setup though.

Current Network Layout:

Current Build Log/PC:

Storage Server Setup:

 

Prior Build Log/PC:

Link to comment
https://linustechtips.com/topic/716693-server-showoff/page/2/#findComment-9227492
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×