AMD Phenom II Overclocks

[JoshSlosh]

Post your specs and overclocks here, dedicated to the last "Good" series of Cpu's from AMD :)

[JoshSlosh]

Cpu@3.9Ghz 1.356V

14x279

Prime 95@67c

Passed 12 Prime95 :D

Planning on getting custom WC loop soon!

Asus Crosshair V Formula

Phenom II X6 1055T

CM Hyper 212+

Gigabyte HD 6850 OC

4GB Kingston HyperX T1 2000Mhz

Asus Xonar DX

Thermaltake 700W

[SubTract]

Phenom II X6 1055T

4.046 Ghz 1.36V

14*289

Noctua NH-D14

stable in prime after 48 hours @ 64°C

Air Conditioned room @ 25°C

[codytappen]

Phenom II X6 1055T 3.2Ghz

At stock voltages with the stock heatsink. It gets pretty hot (71C in prime 95 for 24hrs). I know it's not much of an increase but when video editing you can feel it.

[Luke]

Phenom II X6 1055T 4.046 Ghz 1.36V 14*289 Noctua NH-D14 stable in prime after 48 hours @ 64°C Air Conditioned room @ 25°C

Is your 1055T the 95W or 125W?

[Mr.Banana]

Phenom II X4 965BE

4.34 Ghz

21*200

1.425V

Prime 95 stable after 48hrs @ 62c

[ArcticWhitefur]

Well its been a while since i used this system but..

Phenom II X6 1090T

4.2GHz

1.45V

Prime 95 (Around the mid 80's in Celcius using a Zalman CNPS 9900 Max - Blue)

[K3nnyH]

1055T - 125w

3.8Ghz (1.38v) ~ 14*272 > Using 2 GT-AP 15`s on H70 *Silent*

4.1Ghz (1.45v) ~ 14*293 > Using 2 stock corsair fans *very not silent*

Crosshair V Formula

4GB 1600 Corsair Dominator @ 9-9-9-24

HX750

[Reconciliasion]

1055T - 125w

3.8Ghz (1.38v) ~ 14*272 > Using 2 GT-AP 15`s on H70 *Silent*

4.1Ghz (1.45v) ~ 14*293 > Using 2 stock corsair fans *very not silent*

Crosshair V Formula

4GB 1600 Corsair Dominator @ 9-9-9-24

HX750

"very not silent" llolololololololollollolol :D:D:D:D:D

[harmor]

Phenom II 955 4.20GHz at 1.575 volts

Here is my 4.20GHz overclock. Also here is the Cinebench score using the same speeds.

Here is my current time and temps (I ran Prime95 using Small FFTs)

Here is my Intel Burn Test run 10 passes on very high. The ambient temperature has dropped which may account to the lower temps in IBT compared to Prime95.

[J_Terror]

Oh my... a few years ago I had a 955 Black... if I remember correctly I ran it @ 3.6 GHZ with voltages on auto.

At the time I had the 92mm Noctua tower heat sink on it... Temps were always just fine, but it did get alittle heat soaked when my old GTX 470 got cooking. I wonder what the hell ever happened to that chip... I should try to find it.

[SubTract]

Phenom II X6 1055T 4.046 Ghz 1.36V 14*289 Noctua NH-D14 stable in prime after 48 hours @ 64°C Air Conditioned room @ 25°C

Is your 1055T the 95W or 125W?

95W I have another machine with a 125W chip but it gets to hot, Apparently still capable of 4Ghz but that chip just doesn't want to do it. I can get about 3.5Ghz out of that. It is also however using a 212+ not th NH-D14

[TechFan@ic]

People will start getting pretty epic clocks once those kraken x40 and x60 water cooling loops become more available .

[MunsonedForLife]

1100T

4.06GHz

20x203

Prime 95 for 24 hours and max temp 55C using H100 push/pull

[Luke]

Phenom II X6 1055T 4.046 Ghz 1.36V 14*289 Noctua NH-D14 stable in prime after 48 hours @ 64°C Air Conditioned room @ 25°C

Is your 1055T the 95W or 125W?

95W I have another machine with a 125W chip but it gets to hot' date=' Apparently still capable of 4Ghz but that chip just doesn't want to do it. I can get about 3.5Ghz out of that. It is also however using a 212+ not th NH-D14[/quote']

I'm just curious how much hotter the 125W gets over the 95W if you know? And does it only not overclock higher because of the heat or is it different than the 95W in some other ways? Someone wants to sell me a used UD3 motherboard and phenom x6 125W for a good price. Would appreciate the help.

[TechFan@ic]

last "good" ? don't be hatin man, FX chips are ballin, you just gotta know how to use em.

[MunsonedForLife]

1100T

4.06GHz

20x203

Prime 95 for 24 hours and max temp 55C using H100 push/pull

Going for higher overclock...testing now. Could get 4.06GHz from volt increase. Now increased from 1.4V to 1.425V. Testing now at 4.1GHz, if all goes good, will increase to more and see what happens. I don't really want temps going over 60C after a prime95 testing.

[MunsonedForLife]

1100T

4.06GHz

20x203

Prime 95 for 24 hours and max temp 55C using H100 push/pull

Fail at 1.425V at 4.2GHz using 21x200...any suggestions for different multipliers or anything?

[Bob]

Phenom II X4 960T 3.5GHz stable on prime 95 for 72hrs.

[T-D0S]

Phenom II x2 550 @ 4GHz 1.45volts on Air

http://valid.canardpc.com/show_oc.php?id=2204016

[skitz9417]

my overclock phemon x 4 955be at 1.5volts with a h60 push pull

http://imageshack.us/f/688/newoverclock.png/

[QPofHighGrade]

Phenom II x4 955@4.35GHz 1.575v In BIOS

P/P Antec 620 Max Temp 57C

Crucial Ballistix Sport 1333 OC@1566

Asrock Extreme3 970

[Wats]

Phenom II x4 955@4.35GHz 1.575v In BIOS

P/P Antec 620 Max Temp 57C

Crucial Ballistix Sport 1333 OC@1566

Asrock Extreme3 970

You are boss, Sir.

[harmor]

Phenom II x4 955@4.35GHz 1.575v In BIOS P/P Antec 620 Max Temp 57C Crucial Ballistix Sport 1333 OC@1566 Asrock Extreme3 970

Highest I ever got off of 1.575 volts was 4.20GHz

Your Cinebench score isn't much higher than mine http://i.imgur.com/fR5kF.jpg

IBT stress test: http://i.imgur.com/1l7In.png

[QPofHighGrade]

Phenom II x4 955@4.35GHz 1.575v In BIOS P/P Antec 620 Max Temp 57C Crucial Ballistix Sport 1333 OC@1566 Asrock Extreme3 970

Highest I ever got off of 1.575 volts was 4.20GHz

Your Cinebench score isn't much higher than mine http://i.imgur.com/fR5kF.jpg

IBT stress test: http://i.imgur.com/1l7In.png

Very nice score, but, for only an extra 150MHz i think it is much higher. I've been after a 5 on Cine ever since i started OCing this chip. A lot of tweaking and several reboots later, I've finally reached my goal for the 955.