whea_uncorrectable_error win 10

[JoeNoIce]

i built my own computer

spec:

msi z170 gaming m7

intel core i7-6700k

gigabyte gtx 1070 mini 8gb

16gb 2400 ddr4

sandisk x300 512gb ssd

 

and everytime i try to install windows 10 with the feature update (1607) i crash getting WHEA_UNCORRECTABLE_ERROR.

 

 

EDIT: I DO NOT HAVE WINDOWS 10 INSTALLED YET SO STOP ASSUMING I HAVE IT INSTALLED.

[Droidbot]

Any OC?

[JoeNoIce]

1 minute ago, Droidbot said:

Any OC?

havent even been able to install windows 10 yet so how can i?

[NTDaws]

If there a overclock, you may be putting to little voltage on the CPU.

[JoeNoIce]

1 minute ago, Dawson Wehage said:

If there a overclock, you may be putting to little voltage on the CPU.

no i just reset my entire rig to fac settings.

[JoeNoIce]

22 minutes ago, Dawson Wehage said:

If there a overclock, you may be putting to little voltage on the CPU.

stuck? even microsoft tech support had trouble.

[fjdhdhcyfhf]

thats a driver error or a hardware failure. one of your hardware drivers most likely needs to be updated before you apply the new windows update

[JoeNoIce]

Just now, SCHISCHKA said:

thats a driver error or a hardware failure. one of your hardware drivers most likely needs to be updated before you apply the new windows update

read the post. i dont even have windows installed at all.

[fjdhdhcyfhf]

3 minutes ago, 10xephos01 said:

read the post. i dont even have windows installed at all.

you have a hardware problem or you need to install drivers at install. Remove extra hardware that is not the bare minimum required to install

[JoeNoIce]

Just now, SCHISCHKA said:

you have a hardware problem or you need to install drivers at install. Remove extra hardware that is not the bare minimum required to install

I tried to change my hardware multiple times. and still nada

[fjdhdhcyfhf]

Just now, 10xephos01 said:

I tried to change my hardware multiple times. and still nada

rule out faulty memory with this http://www.memtest86.com/

[JoeNoIce]

1 minute ago, SCHISCHKA said:

rule out faulty memory with this http://www.memtest86.com/

how can i run a mem test if the computer does not even have an OPERATING SYSTEM on it.

[fjdhdhcyfhf]

Just now, 10xephos01 said:

how can i run a mem test if the computer does not even have an OPERATING SYSTEM on it.

MEMTEST86 IS A BOOTABLE CD

[JoeNoIce]

9 minutes ago, SCHISCHKA said:

MEMTEST86 IS A BOOTABLE CD

running tests in default settings

[JoeNoIce]

51 minutes ago, SCHISCHKA said:

MEMTEST86 IS A BOOTABLE CD

as expected it passed

[fjdhdhcyfhf]

5 minutes ago, 10xephos01 said:

as expected it passed

cool. Next I would try at install, load USB drivers for your motherboard; if that cannot be done boot from a CD instead of USB.

 

 

[JoeNoIce]

2 minutes ago, SCHISCHKA said:

cool. Next I would try at install, load USB drivers for your motherboard; if that cannot be done boot from a CD instead of USB.

 

 

bios updates?

[Droidbot]

What power supply do you have? PSU may be faulty sending bad voltages to the CPU causing it to halt and shut down the system

[fjdhdhcyfhf]

5 minutes ago, 10xephos01 said:

bios updates?

Maybe but i dont think so. That would be the last thing I would try to do. I had a look at the BIOS updates for your motherboard; there was an update this year for new CPUs, your 6700 was released last year so I dont think it will be relevant to that update. There was a bios update to make the board compatable with a samsung SSD, which i also do not think is relevant. Theres a bunch of PCI related updates but that should not be relevant if you have tried booting without the GPU.

 

I think the USB drivers are to blame, that should be the easiest to download and load onto your installation disc.

[JoeNoIce]

1 minute ago, Droidbot said:

What power supply do you have? PSU may be faulty sending bad voltages to the CPU causing it to halt and shut down the system

tx550m corsair it aint faulty i have used it before

[JoeNoIce]

1 minute ago, SCHISCHKA said:

Maybe but i dont think so. That would be the last thing I would try to do. I had a look at the BIOS updates for your motherboard; there was an update this year for new CPUs, your 6700 was released last year so I dont think it will be relevant to that update. There was a bios update to make the board compatable with a samsung SSD, which i also do not think is relevant. Theres a bunch of PCI related updates but that should not be relevant if you have tried booting without the GPU.

 

I think the USB drivers are to blame, that should be the easiest to download and load onto your installation disc.

i just thought of that a couple of minutes ago removing the gpu

[fjdhdhcyfhf]

1 minute ago, 10xephos01 said:

i just thought of that a couple of minutes ago removing the gpu

try it but at install there are no GPU drivers loaded. it falls back to a low graphics mode.

[JoeNoIce]

4 minutes ago, SCHISCHKA said:

try it but at install there are no GPU drivers loaded. it falls back to a low graphics mode.

tryed to install w/o gpu and still crashed

[Droidbot]

4 minutes ago, SCHISCHKA said:

try it but at install there are no GPU drivers loaded. it falls back to a low graphics mode.

GPU is not used during a graphical install, but it is still taking up memory and running. 

[JoeNoIce]

37 minutes ago, Droidbot said:

GPU is not used during a graphical install, but it is still taking up memory and running. 

ok, and?