Little help (regarding case)

[Kala]

so gtx 1070 amp extreme zotac videocard is on the way and im wondering will it fit into 

NZXT Phantom 410 Series CA-PH410-B1 case ty in forward

[mpsparrow]

What is your build? pcpartpicker will tell you if it will fit or not.

[TheDankKoosh]

5 minutes ago, Kala said:

so gtx 1070 amp extreme zotac videocard is on the way and im wondering will it fit into 

NZXT Phantom 410 Series CA-PH410-B1 case ty in forward

It will be a tight squeeze, I would suggest the regular amp edition over the extreme. The extreme weighs too much and will cause sag on your motherboard, which can break the pci-e slot.

Edit: oh, I didn't notice that you had said it is already on the way. You may want to get a holdup bar for that gpu then.

[Oshino Shinobu]

You will need to remove the top drive cage to fit it. The Phantom 410 supports 305mm graphics cards with the drive bay installed, but the card is 325mm long. With the drive cage removed, it increases to 420mm.

[Hero7750]

9.06" (230mm) With Drive Cages
12.01" (305mm) Without Drive Cages

[Energycore]

8 minutes ago, Kala said:

so gtx 1070 amp extreme zotac videocard is on the way and im wondering will it fit into 

NZXT Phantom 410 Series CA-PH410-B1 case ty in forward

 Yes

[Kala]

6 minutes ago, mpsparrow said:

What is your build? pcpartpicker will tell you if it will fit or not.

https://pcpartpicker.com/list/Zy7XVY thats the thing it would be easy right im buiying it locally since everything is ordered theres no phantom 410 on pcpart

[Kala]

1 minute ago, Energycore said:

 Yes

ty for simple answer

[Kala]

2 minutes ago, Hero7750 said:

9.06" (230mm) With Drive Cages
12.01" (305mm) Without Drive Cages

those seem pretty small like rly

[Kala]

4 minutes ago, Oshino Shinobu said:

You will need to remove the top drive cage to fit it. The Phantom 410 supports 305mm graphics cards with the drive bay installed, but the card is 325mm long. With the drive cage removed, it increases to 420mm.

removing the cage wont be a problem now i can rest ty

[Oshino Shinobu]

3 minutes ago, Hero7750 said:

9.06" (230mm) With Drive Cages
12.01" (305mm) Without Drive Cages

305mm is the clearance without the fan installed on the front of the drive cages. 230mm is with the fan installed at full pivot. With the cages removed, it goes up to 420mm. 

[Energycore]

1 minute ago, Kala said:

ty for simple answer

You might have to leave a couple hard drive bays unused to fit it. But it will fit if you do that.

[Oshino Shinobu]

1 minute ago, Kala said:

those seem pretty small like rly

Those measurements are wrong. 305mm is with the cages installed and the fan not installed. 

[Kala]

2 minutes ago, Oshino Shinobu said:

Those measurements are wrong. 305mm is with the cages installed and the fan not installed. 

so if i remove drive bays at bottom 365mm should fit well and there shouldnt be any problems ty for fast answers

[Oshino Shinobu]

1 minute ago, Kala said:

so if i remove drive bays at bottom 365mm should fit well and there shouldnt be any problems ty for fast answers

You'll want to remove the top section of the drive bays. They will just slide out. Then it will easily fit. Removing the bottom bays won't offer any extra clearance for GPUs as the PCIe slots all line up with the top bays. 

 

With the top bays removed, you still have 3 drive bays left, as well as the 5.25" bays at the top. 

[Megah3rtz]

21 minutes ago, huilun02 said:

Did you just buy that case? Should have gotten an S340 instead. Wayy more modern.

Looks? Thats usually the reason people buy a case, and wanting a power button. 

[Hero7750]

2 hours ago, Kala said:

those seem pretty small like rly

got it right off of pcpartpicker