What PSU Size ?

[XcyiouS]

Hi ! I have a Phanteks Enthoo Pro M and i would like find out what's the size needed for the psu so that it fills the whole space as my current CX600M Leaves a 1.5-ish finger gap from the shroud 

[SmashinMachine]

IF you want to fill this space, you need a bigger psu that means more power. Over 1000Watt PSUs will fill that space.

 

[Sakkura]

Your current PSU is about 5.5 inches (140mm) long. Just find one that's an inch or two longer (or measure the gap if you want to know exactly what length to aim for).

[Krause]

6 minutes ago, SmashinMachine said:

IF you want to fill this space, you need a bigger psu that means more power. Over 1000Watt PSUs will fill that space.

 

would a 850watt not be big enough? you can also add custom plates?

[XcyiouS]

4 minutes ago, Krause said:

would a 850watt not be big enough? you can also add custom plates?

Custom plates?

[SmashinMachine]

1 minute ago, Krause said:

would a 850watt not be big enough? you can also add custom plates?

Yeah, maybe. They are 10-20mm longer. You have to look at the dimensions before you buy.

For example:

Corsair rm850x is 180mm long

Corsair ax860i is 160mm long

[Krause]

4 minutes ago, XcyiouS said:

Custom plates?

you can get plates to go above the power supply to fill in the space and have it in your color of your choice and also looks pretty nice in your rig

[XcyiouS]

4 minutes ago, Krause said:

you can get plates to go above the power supply to fill in the space and have it in your color of your choice and also looks pretty nice in your rig

oh cool didn't know that there's psu plates . How much would it cost tho and where do i get it

 

[Clanscorpia]

2 minutes ago, XcyiouS said:

oh cool didn't know that there's psu plates . How much would it cost tho and where do i get it

 

Make one yourself. Cut and paint aluminium or just paint cardboard

[Krause]

2 minutes ago, XcyiouS said:

oh cool didn't know that there's psu plates . How much would it cost tho and where do i get it

 

You could use acrylic Plexiglas, if you have a plastic shop or someplace similar around, just bring them the dimensions and they can cut and bend it for you, after which you can purchase vinyl sheets like carbon fiber or even the finish you mentioned, wrap it and your done

[XcyiouS]

12 minutes ago, Krause said:

You could use acrylic Plexiglas, if you have a plastic shop or someplace similar around, just bring them the dimensions and they can cut and bend it for you, after which you can purchase vinyl sheets like carbon fiber or even the finish you mentioned, wrap it and your done

 

14 minutes ago, Clanscorpia said:

Make one yourself. Cut and paint aluminium or just paint cardboard

ah i see .. but if i would to get a psu instead of the psu plate , most likely it'll be 850 W ++?

[Krause]

Just now, XcyiouS said:

 

ah i see .. but if i would to get a psu instead of the psu plate , most likely it'll be 850 W ++?

at least an 850 w yes but check the measurements first because some 850 w can be same size as some 500w

 

[XcyiouS]

2 minutes ago, Krause said:

at least an 850 w yes but check the measurements first because some 850 w can be same size as some 500w

 

Okay Thanks for all your replies ~!

[Krause]

1 minute ago, XcyiouS said:

Okay Thanks for all your replies ~!

your welcome hope you get everything sorted nicely!