GPU Sag

[InsertName]

Any way to solve it? It is slight but noticeable. Iw as thinking some sort of figurine, like deadpool (Cause red/black.).

 

Pics for reference:

 

[the crunchiumo]

something like this will fox your issue. there are many other similar implementations using acrylic. i think puget systems sells them but im not too sure.

[fjdhdhcyfhf]

nylon fishing line

[HoneyBooBoo]

5 minutes ago, the crunchiumo said:

something like this will fox your issue. there are many other similar implementations using acrylic. i think puget systems sells them but im not too sure.

What is the point of levelling your GPU if you're just going to add an unlevel extra piece of ugly metal... Makes it look even worse than if it's sagging. 

[the crunchiumo]

Just now, HoneyBooBoo said:

What is the point of levelling your GPU if you're just going to add an unlevel extra piece of ugly metal... Makes it look even worse than if it's sagging. 

for peace of mind i guess the aesthetics is all up to the individual.

[fjdhdhcyfhf]

19 minutes ago, HoneyBooBoo said:

What is the point of levelling your GPU if you're just going to add an unlevel extra piece of ugly metal... Makes it look even worse than if it's sagging. 

its not a 8800GTX. they do worry about nothing.

[InsertName]

Just now, SCHISCHKA said:

its not a 8800GTX. they do worry about nothing.

Its a 980Ti :D.

[fjdhdhcyfhf]

you can also look at your power cable. 

[InsertName]

Just now, SCHISCHKA said:

you can also look at your power cable. 

What about it?

[fjdhdhcyfhf]

Just now, InsertName said:

What about it?

use it strategically to pull card up

[SmashinMachine]

Or such a gpu holder like this can help

 

 

[Quaker]

Take a regular pencil (preferably new, unused) - red for aesthetics - and cut it to the proper length and use it to support the edge of the graphics card. (Keep the eraser in place and use the eraser end at the graphics card)

Or - cut a piece of wooden dowel to the proper length and paint it red or black or whatever.

[MkaiL]

I would get that CM holder, it's called the Master Accessory Universal VGA Holder. But if aesthetics is what you're worrying about, I would first fix those led lights in your case. They look messy hanging loose. 

[InsertName]

47 minutes ago, MkaiL said:

I would get that CM holder, it's called the Master Accessory Universal VGA Holder. But if aesthetics is what you're worrying about, I would first fix those led lights in your case. They look messy hanging loose. 

Have tried my best. That was an old pic.

[MkaiL]

Just now, InsertName said:

Have tried my best. That was an old pic.

I have the same case so I know the pain . The black edges on the glass are very thin making it hard to hide anything.