Jump to content

what cooler are you using?

=======================Current Build=======================

Motherboard: ASUS Z170-AR

CPU: i5-6600k @ 4.5Ghz Overclocked

GPU: Gigabyte GTX980 @ 1200 Mhz Oveclocked GPU boost 1400Mhz

Memory: Corsair Dominator 16Gb @ 3200 Mhz

Cooler: NZXT Kraken x61

Storage: Corsair Force GS 128Gb + WD2TB + Seagate 1TB

PSU: Corsair HX650

Lighting: NZXT HUE+ with extension

Display: LG 34' Ultrawide 3440x1440

Peripherals: Razer Blackwidow x Chroma + Razer Firefly + Razer Mamba Chroma

Headphones: Astro A40 + Miniamp

 

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743824
Share on other sites

Link to post
Share on other sites

Most AIOs do not have a variable speed pump.

Forcing them to run at a lower voltage can damage it.

 

If you hear noise that means there are bubbles going through it and reducing the speed will not help.

Try mounting the radiator vertically at the front of your case with the barbs on the top side.

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743828
Share on other sites

Link to post
Share on other sites

1 minute ago, PCNoobie said:

sorry man no experience with that cooler. What header are you plugging the pump into?

=======================Current Build=======================

Motherboard: ASUS Z170-AR

CPU: i5-6600k @ 4.5Ghz Overclocked

GPU: Gigabyte GTX980 @ 1200 Mhz Oveclocked GPU boost 1400Mhz

Memory: Corsair Dominator 16Gb @ 3200 Mhz

Cooler: NZXT Kraken x61

Storage: Corsair Force GS 128Gb + WD2TB + Seagate 1TB

PSU: Corsair HX650

Lighting: NZXT HUE+ with extension

Display: LG 34' Ultrawide 3440x1440

Peripherals: Razer Blackwidow x Chroma + Razer Firefly + Razer Mamba Chroma

Headphones: Astro A40 + Miniamp

 

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743833
Share on other sites

Link to post
Share on other sites

Just now, PCNoobie said:

pump has 3 pin connector, and it's connected to 4 pin water pump on mobo.

Go to the bios and see if you can adjust the voltage on that header, try to increase the voltage since lower voltages can cause gurgling sounds in pumps

=======================Current Build=======================

Motherboard: ASUS Z170-AR

CPU: i5-6600k @ 4.5Ghz Overclocked

GPU: Gigabyte GTX980 @ 1200 Mhz Oveclocked GPU boost 1400Mhz

Memory: Corsair Dominator 16Gb @ 3200 Mhz

Cooler: NZXT Kraken x61

Storage: Corsair Force GS 128Gb + WD2TB + Seagate 1TB

PSU: Corsair HX650

Lighting: NZXT HUE+ with extension

Display: LG 34' Ultrawide 3440x1440

Peripherals: Razer Blackwidow x Chroma + Razer Firefly + Razer Mamba Chroma

Headphones: Astro A40 + Miniamp

 

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743843
Share on other sites

Link to post
Share on other sites

2 minutes ago, Geoffrey said:

Go to the bios and see if you can adjust the voltage on that header, try to increase the voltage since lower voltages can cause gurgling sounds in pumps

He said he wanted to lower the RPM

 

but yeah you can adjust it in the bios

My Build, v2.1 --- CPU: i7-8700K @ 5.2GHz/1.288v || MoBo: Asus ROG STRIX Z390-E Gaming || RAM: 4x4GB G.SKILL Ripjaws 4 2666 14-14-14-33 || Cooler: Custom Loop || GPU: EVGA GTX 1080 Ti SC Black, on water || PSU: EVGA G2 850W || Case: Corsair 450D || SSD: 850 Evo 250GB, Intel 660p 2TB || Storage: WD Blue 2TB || G502 & Glorious PCGR Fully Custom 80% Keyboard || MX34VQ, PG278Q, PB278Q

Audio --- Headphones: Massdrop x Sennheiser HD 6XX || Amp: Schiit Audio Magni 3 || DAC: Schiit Audio Modi 3 || Mic: Blue Yeti

 

[Under Construction]

 

My Truck --- 2002 F-350 7.3 Powerstroke || 6-speed

My Car --- 2006 Mustang GT || 5-speed || BBK LTs, O/R X, MBRP Cat-back || BBK Lowering Springs, LCAs || 2007 GT500 wheels w/ 245s/285s

 

The Experiment --- CPU: i5-3570K @ 4.0 GHz || MoBo: Asus P8Z77-V LK || RAM: 16GB Corsair 1600 4x4 || Cooler: CM Hyper 212 Evo || GPUs: Asus GTX 750 Ti, || PSU: Corsair TX750M Gold || Case: Thermaltake Core G21 TG || SSD: 840 Pro 128GB || HDD: Seagate Barracuda 2TB

 

R.I.P. Asus X99-A motherboard, April 2016 - October 2018, may you rest in peace. 5820K, if I ever buy you a new board, it'll be a good one.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743850
Share on other sites

Link to post
Share on other sites

 

8 minutes ago, Geoffrey said:

Go to the bios and see if you can adjust the voltage on that header, try to increase the voltage since lower voltages can cause gurgling sounds in pumps

 

5 minutes ago, Cereal5 said:

He said he wanted to lower the RPM

 

but yeah you can adjust it in the bios

Well it doesn't show up in bios

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743862
Share on other sites

Link to post
Share on other sites

6 minutes ago, PCNoobie said:

 

 

Well it doesn't show up in bios

What motherboard do you have? You should be able to get some software that can monitor/change fan control

My Build, v2.1 --- CPU: i7-8700K @ 5.2GHz/1.288v || MoBo: Asus ROG STRIX Z390-E Gaming || RAM: 4x4GB G.SKILL Ripjaws 4 2666 14-14-14-33 || Cooler: Custom Loop || GPU: EVGA GTX 1080 Ti SC Black, on water || PSU: EVGA G2 850W || Case: Corsair 450D || SSD: 850 Evo 250GB, Intel 660p 2TB || Storage: WD Blue 2TB || G502 & Glorious PCGR Fully Custom 80% Keyboard || MX34VQ, PG278Q, PB278Q

Audio --- Headphones: Massdrop x Sennheiser HD 6XX || Amp: Schiit Audio Magni 3 || DAC: Schiit Audio Modi 3 || Mic: Blue Yeti

 

[Under Construction]

 

My Truck --- 2002 F-350 7.3 Powerstroke || 6-speed

My Car --- 2006 Mustang GT || 5-speed || BBK LTs, O/R X, MBRP Cat-back || BBK Lowering Springs, LCAs || 2007 GT500 wheels w/ 245s/285s

 

The Experiment --- CPU: i5-3570K @ 4.0 GHz || MoBo: Asus P8Z77-V LK || RAM: 16GB Corsair 1600 4x4 || Cooler: CM Hyper 212 Evo || GPUs: Asus GTX 750 Ti, || PSU: Corsair TX750M Gold || Case: Thermaltake Core G21 TG || SSD: 840 Pro 128GB || HDD: Seagate Barracuda 2TB

 

R.I.P. Asus X99-A motherboard, April 2016 - October 2018, may you rest in peace. 5820K, if I ever buy you a new board, it'll be a good one.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743883
Share on other sites

Link to post
Share on other sites

5 minutes ago, LukaH said:

i had an Enermax Liqmax 240 aio the pump noise was fine at stock speeds. have you had the unit for a long time could be the pump failing? 

It's been 2 months. The pump runs quietly on idle(web browsing), but it starts make noise when I play games, and do cpu benchmark.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743899
Share on other sites

Link to post
Share on other sites

Just now, PCNoobie said:

Mine is AsUS Z170-A, and I can control fans, but it doesn't show the option for water pump.

What fan header did you plug the cooler into? It should have a name on the motherboard

My Build, v2.1 --- CPU: i7-8700K @ 5.2GHz/1.288v || MoBo: Asus ROG STRIX Z390-E Gaming || RAM: 4x4GB G.SKILL Ripjaws 4 2666 14-14-14-33 || Cooler: Custom Loop || GPU: EVGA GTX 1080 Ti SC Black, on water || PSU: EVGA G2 850W || Case: Corsair 450D || SSD: 850 Evo 250GB, Intel 660p 2TB || Storage: WD Blue 2TB || G502 & Glorious PCGR Fully Custom 80% Keyboard || MX34VQ, PG278Q, PB278Q

Audio --- Headphones: Massdrop x Sennheiser HD 6XX || Amp: Schiit Audio Magni 3 || DAC: Schiit Audio Modi 3 || Mic: Blue Yeti

 

[Under Construction]

 

My Truck --- 2002 F-350 7.3 Powerstroke || 6-speed

My Car --- 2006 Mustang GT || 5-speed || BBK LTs, O/R X, MBRP Cat-back || BBK Lowering Springs, LCAs || 2007 GT500 wheels w/ 245s/285s

 

The Experiment --- CPU: i5-3570K @ 4.0 GHz || MoBo: Asus P8Z77-V LK || RAM: 16GB Corsair 1600 4x4 || Cooler: CM Hyper 212 Evo || GPUs: Asus GTX 750 Ti, || PSU: Corsair TX750M Gold || Case: Thermaltake Core G21 TG || SSD: 840 Pro 128GB || HDD: Seagate Barracuda 2TB

 

R.I.P. Asus X99-A motherboard, April 2016 - October 2018, may you rest in peace. 5820K, if I ever buy you a new board, it'll be a good one.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743909
Share on other sites

Link to post
Share on other sites

8 minutes ago, PCNoobie said:

I plugged it into "w-pump," which is water pump I guess.

You should have gotten a program called Asus ai suite 3 with your motherboard. If not you can download it but it has fan control software in it. I use it on my Asus X99-A

My Build, v2.1 --- CPU: i7-8700K @ 5.2GHz/1.288v || MoBo: Asus ROG STRIX Z390-E Gaming || RAM: 4x4GB G.SKILL Ripjaws 4 2666 14-14-14-33 || Cooler: Custom Loop || GPU: EVGA GTX 1080 Ti SC Black, on water || PSU: EVGA G2 850W || Case: Corsair 450D || SSD: 850 Evo 250GB, Intel 660p 2TB || Storage: WD Blue 2TB || G502 & Glorious PCGR Fully Custom 80% Keyboard || MX34VQ, PG278Q, PB278Q

Audio --- Headphones: Massdrop x Sennheiser HD 6XX || Amp: Schiit Audio Magni 3 || DAC: Schiit Audio Modi 3 || Mic: Blue Yeti

 

[Under Construction]

 

My Truck --- 2002 F-350 7.3 Powerstroke || 6-speed

My Car --- 2006 Mustang GT || 5-speed || BBK LTs, O/R X, MBRP Cat-back || BBK Lowering Springs, LCAs || 2007 GT500 wheels w/ 245s/285s

 

The Experiment --- CPU: i5-3570K @ 4.0 GHz || MoBo: Asus P8Z77-V LK || RAM: 16GB Corsair 1600 4x4 || Cooler: CM Hyper 212 Evo || GPUs: Asus GTX 750 Ti, || PSU: Corsair TX750M Gold || Case: Thermaltake Core G21 TG || SSD: 840 Pro 128GB || HDD: Seagate Barracuda 2TB

 

R.I.P. Asus X99-A motherboard, April 2016 - October 2018, may you rest in peace. 5820K, if I ever buy you a new board, it'll be a good one.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8743935
Share on other sites

Link to post
Share on other sites

43 minutes ago, PCNoobie said:

It worked thanks!

Good to hear :)

My Build, v2.1 --- CPU: i7-8700K @ 5.2GHz/1.288v || MoBo: Asus ROG STRIX Z390-E Gaming || RAM: 4x4GB G.SKILL Ripjaws 4 2666 14-14-14-33 || Cooler: Custom Loop || GPU: EVGA GTX 1080 Ti SC Black, on water || PSU: EVGA G2 850W || Case: Corsair 450D || SSD: 850 Evo 250GB, Intel 660p 2TB || Storage: WD Blue 2TB || G502 & Glorious PCGR Fully Custom 80% Keyboard || MX34VQ, PG278Q, PB278Q

Audio --- Headphones: Massdrop x Sennheiser HD 6XX || Amp: Schiit Audio Magni 3 || DAC: Schiit Audio Modi 3 || Mic: Blue Yeti

 

[Under Construction]

 

My Truck --- 2002 F-350 7.3 Powerstroke || 6-speed

My Car --- 2006 Mustang GT || 5-speed || BBK LTs, O/R X, MBRP Cat-back || BBK Lowering Springs, LCAs || 2007 GT500 wheels w/ 245s/285s

 

The Experiment --- CPU: i5-3570K @ 4.0 GHz || MoBo: Asus P8Z77-V LK || RAM: 16GB Corsair 1600 4x4 || Cooler: CM Hyper 212 Evo || GPUs: Asus GTX 750 Ti, || PSU: Corsair TX750M Gold || Case: Thermaltake Core G21 TG || SSD: 840 Pro 128GB || HDD: Seagate Barracuda 2TB

 

R.I.P. Asus X99-A motherboard, April 2016 - October 2018, may you rest in peace. 5820K, if I ever buy you a new board, it'll be a good one.

Link to comment
https://linustechtips.com/topic/679799-aio-cooler-pump-help/#findComment-8744161
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×