6700k Temps

[danrey84]

I just want some feedback really. I ran a stress test on my out of the box 6700k with real bench for 8 hours and my temps were. Max 70C, Average 66C and my Core VID was 1.317 during the test. I am on a AIO 240mm from Deepcool. Would these temps and results seem what roughly to expect??

 

P.S temps when at idle are at 20C

 

Thanks everyone.

[AliB2512]

When I get home I'll fill you in with temps 

[done12many2]

Idle temp looks great.  You must have a pretty nice ambient temp.  Max temps looks pretty good as well especially when you consider that your ran RealBench for 8 hours.  Nice!  Did your fans spin up to max during the RealBench run?

[dylanmdestpern]

14 minutes ago, danrey84 said:

P.S temps when at idle are at 20C

That's pretty darn good. My 6700K at stock speed with my AIO cooler is idling at about 27.

[Rickie cheong]

whats core VID

[Skiiwee29]

Honestly that seems a bit high for stock speeds on water. You should manually set your voltages to 1.2 and re-test with stock speeds. 

[done12many2]

10 minutes ago, Rickie cheong said:

whats core VID

 

VID is the voltage requested by the CPU.  It is not VCore, which is the actual amount that the CPU is using.  Hope that helps.

[danrey84]

18 minutes ago, done12many2 said:

Idle temp looks great.  You must have a pretty nice ambient temp.  Max temps looks pretty good as well especially when you consider that your ran RealBench for 8 hours.  Nice!  Did your fans spin up to max during the RealBench run?

In relation to the fans I went and saw what fan speed would be at 70C and its around the 60 percent mark

 

8 minutes ago, legacy99 said:

Honestly that seems a bit high for stock speeds on water. You should manually set your voltages to 1.2 and re-test with stock speeds. 

As I say this was literally plugged in the MOBO and just tested so I havnt played with the voltage as of yet

[done12many2]

6 minutes ago, danrey84 said:

In relation to the fans I went and saw what fan speed would be at 70C and its around the 60 percent mark

 

You're right where you need to be without having made any adjustments.  Congrats on the new build. 

[danrey84]

5 hours ago, legacy99 said:

Honestly that seems a bit high for stock speeds on water. You should manually set your voltages to 1.2 and re-test with stock speeds. 

I set my voltages about 3 hours ago to 1.2 on the VCore and have since played The Division in that time and my highest temp was around 55C in that time had no crashes or anything like that

[Imakuni]

1 hour ago, danrey84 said:

I set my voltages about 3 hours ago to 1.2 on the VCore and have since played The Division in that time and my highest temp was around 55C in that time had no crashes or anything like that

Good, now it's time to raise them again and start working on your overclock.

[Skiiwee29]

9 hours ago, danrey84 said:

I set my voltages about 3 hours ago to 1.2 on the VCore and have since played The Division in that time and my highest temp was around 55C in that time had no crashes or anything like that

Much better. Like @Imakuni mentiioned, time to dial in the max OC. I have mine right now at 4.6ghz at 1.35v which is about the normal people are seeing on the 6700k, but as always, depends on the sillicon lottery and if you can keep it cool.