Panel Fron Connector

[DottzPG]

Hi

So i just changed the cpu cooler of one of my friends pc, unpluged everything, i mounted the cpu cooler, put everything as is goes, but it will not start.

 

His pc is a prebuild Lenovo 50-50 , the funny part abbout them is that the cable have there own colors to know what and where to put back on mobo so you can't get it wrong,

 

My opinion is that the fron panel connector not working or something, i tryed to mount it in divers ways and sometimes the fans start then stop and start again, but nothing continue.

 

What are my option for not starting the pc. Why is not going, if any question i will be here to answear them.

 

 

[Matt_98]

try taking out the front panel connector and jumping the power button pins

[bgibbz]

If you look at the front panel connectors, you should be able to see labels for the pwr switch. Figure out which two pins are the pwr switch, and short them with a screwdriver. If that doesnt start the system, then something is wrong with the machine. If that does start it, simply orientate the front panel connector so that the two power pins line up with the two power wires in the block.

[LukaH]

maybe the fans are not what the bios is expecting... maybe they need more voltage consume more watts... have you tried with the old cooler installed?

[WkdPaul]

Check the first picture, seems the front panel isn't connected correctly, there are pins exposed.

[DottzPG]

@Matt_98i don't know how to do that.

@bgibbz I will try to do that, i must open all the front pc, and take off everything because this prebuild pc is all stuck all over another, if you take something down you have to take everything down.

@LukaH Is a Be Quiet Rock cpu fan, is kind huge, and it didn't even fit inside, but he insisted that he wants that one-.- I tryed even without the the fans to start up, but nothing.

@wkdpaul That is a 7 with 6 pins = 13 on mobo, and the connector is a 6 with 5 = 11, with one spot free, i will never get it spot, i take the connector with that one, the missing pin that is blocked will not let me push the connector down, i don't know if i explained properly.

 

I will return after i try with the Screw drive or something.

[Matt_98]

@DottzPG Take out the connector that leads to the front panel  and arc 2 of the pins on the mobo together (with a screwdriver or something else conductive) until it starts up (then you know which pins are rot the power button).

[Matt_98]

@DottzPG Also dont be surprised if the motherboard just wont accept the upgrade. in my experience lenovo pre built PC's always have crappy motherboards.

[DottzPG]

55 minutes ago, Matt_98 said:

@DottzPG Also dont be surprised if the motherboard just wont accept the upgrade. in my experience lenovo pre built PC's always have crappy motherboards.

I will try that Matt_98 and i will try to get back the old Cpu fan cooler. Hope to get it fix it. Thanks for your time and replay.

 

Thanks to Everyone.

[LukaH]

any luck?

[DottzPG]

So Littel Update, i didn't manage to jump it manualy how you told me, so i kind give it up, i want to add the fact that by mistake i plugged the usb pins from case to the fronpanel conexionn the one with hdd, pw, sw, rw, etc. then i double check and got aware of the fact that it wasan't the fron panel cable, if this happens? is there the possibility that the psu can go down? or something?

 

I must add i changed it him the mobo with a cheep msi h81m-p33 i don't know how good it is, but the problem is, that the cables from the case lenovo don't match with the pins on MSI mobo.

 

Now at this point i just try to see what is not working, but i can't understand, eventualy i will just a buy a case and psu and that's it, but as much as i wish i prefer only to fix it with one buy as the money are a littel short now.

 

 

[DottzPG]

On 9/27/2016 at 4:13 PM, DottzPG said:

So Littel Update, i didn't manage to jump it manualy how you told me, so i kind give it up, i want to add the fact that by mistake i plugged the usb pins from case to the fronpanel conexionn the one with hdd, pw, sw, rw, etc. then i double check and got aware of the fact that it wasan't the fron panel cable, if this happens? is there the possibility that the psu can go down? or something?

 

I must add i changed it him the mobo with a cheep msi h81m-p33 i don't know how good it is, but the problem is, that the cables from the case lenovo don't match with the pins on MSI mobo.

 

Now at this point i just try to see what is not working, but i can't understand, eventualy i will just a buy a case and psu and that's it, but as much as i wish i prefer only to fix it with one buy as the money are a littel short now.

In the end i didn't manage to fix nothing, i just bought a new case Fractal Designe r1100+a 500 w cheep psu, and it's on. Off course adding even the mobo everything reache arround 1000 Dkk ( 134 euro) .

Note to self "never touche again a prebuild pc" or "learn more beffor starting doing stuff"

 

I want to thank to everyone for the time and the help that i get, really nice comunity. I will stick arround.

Thank u Dottzpg Is out.

On 9/27/2016 at 4:13 PM, DottzPG said: