Can't enter pfsense Web interface

[TubsAlwaysWins]

I just got a Watchguard X700 and put pfsense on it. Now I need to enter the Web configuration to add some code so I can boot it without having to be near it. All it gives is a WAN ip address of 192.168.100.147/24

 

How do I access the Web configurator or get LAN IP addresses so I can. Thanks 

[Mountine]

If the pc is in the same lan just put the ip into the url address of you browser 

 

[TubsAlwaysWins]

1 minute ago, Mountine said:

If the pc is in the same lan just put the ip into the url address of you browser 

 

1. Tried that, doesn't work.

2. It doesn't work because the LAN doesn't have an iP address 

[Mountine]

set it up via console , without add vlan and give it a lan address

 

[TubsAlwaysWins]

53 minutes ago, Mountine said:

set it up via console , without add vlan and give it a lan address

 

Did that. Still wouldn't let me connect to wen interface. I'm doing it again 

[tt2468]

3 hours ago, TubsAlwaysWins said:

Did that. Still wouldn't let me connect to wen interface. I'm doing it again 

It wont let you access it via wan, you have to access it via lan. Go into the console and set your lan address. Remember that wan is for internet...

[TubsAlwaysWins]

1 hour ago, tt2468 said:

It wont let you access it via wan, you have to access it via lan. Go into the console and set your lan address. Remember that wan is for internet...

Yeah figured that out a few hours ago. Thanks