Cup temps after overclock

[Skullbreaker]

Hi I just overclocked my 6700k to 4.7 ghz and the temps are ranging from about the high 60s to lower 70s on stress test is this good? I used xmp, and I changed the voltages to lowest possible on 4.7 ghz, are these temps too high because before overclock the temps were 80c

[Skiiwee29]

That is fine. During stress testing as long as you keep temps ~75c your golden. 

[Skullbreaker]

1 minute ago, legacy99 said:

That is fine. During stress testing as long as you keep temps ~75c your golden. 

The computer just crashed gonna try again and see if it's stable or not if not I will higher voltage 

[Skullbreaker]

3 minutes ago, legacy99 said:

That is fine. During stress testing as long as you keep temps ~75c your golden. 

And should I add voltage my .005 or more?

[Skiiwee29]

As long as you keep voltage under 1.4v with adequate cooling your good. 

[BarisERY]

5 minutes ago, Skullbreaker said:

And should I add voltage my .005 or more?

You can for added stability

[Skullbreaker]

3 minutes ago, legacy99 said:

As long as you keep voltage under 1.4v with adequate cooling your good. 

Ok my voltage is now 2.7v and I have an h110i as a cooler is that good?

[Skiiwee29]

ummmm... 2.7v??? FIRE ALERT... How is your CPU not dead...

[Skullbreaker]

5 minutes ago, legacy99 said:

As long as you keep voltage under 1.4v with adequate cooling your good. 

I didn't sync all cores is that ok? I made my first core 4.7 second 4.6....

[Skullbreaker]

Just now, legacy99 said:

ummmm... 2.7v??? FIRE ALERT... How is your CPU not dead...

Sorry 1.27

[Skiiwee29]

Your vcore should never be above 1.4v for 24/7 operation with a 6700k...

[Skullbreaker]

1 minute ago, legacy99 said:

Your vcore should never be above 1.4v for 24/7 operation with a 6700k...

Yea sorry mistake it's 1.27

[Skullbreaker]

1 minute ago, legacy99 said:

Your vcore should never be above 1.4v for 24/7 operation with a 6700k...

Maximum temp just reached 75 in the middle of stress test

[Skiiwee29]

ok, 1.27v and your stable at 4.7ghz?? damn.. good job. 

[Skullbreaker]

3 minutes ago, legacy99 said:

ok, 1.27v and your stable at 4.7ghz?? damn.. good job. 

Not stable yet just crashed 

[Skullbreaker]

Just now, Skullbreaker said:

Not stable yet just crashed 

Going to 1.275

[Skullbreaker]

8 minutes ago, legacy99 said:

ok, 1.27v and your stable at 4.7ghz?? damn.. good job. 

What are your cup temps?

[Skiiwee29]

When I run Aida64 I am around 70c and Intel Burn Test usually around 80-85c which im fine with because its a burst test, not sustained. 

[Skullbreaker]

1 minute ago, legacy99 said:

When I run Aida64 I am around 70c and Intel Burn Test usually around 80-85c which im fine with because its a burst test, not sustained. 

I'm using prime95

[Skullbreaker]

4 minutes ago, legacy99 said:

When I run Aida64 I am around 70c and Intel Burn Test usually around 80-85c which im fine with because its a burst test, not sustained. 

My max temp has reached 77c is that ok??

[Skiiwee29]

Yea, as long as you can run stable for 30m-1hr is what I personally strive for you should be good. 

[Skullbreaker]

7 minutes ago, legacy99 said:

Yea, as long as you can run stable for 30m-1hr is what I personally strive for you should be good. 

Thx