FX 6300 post pin-bending problems

[l3lueapple]

Hello, yesterday during my usual pc clean when taking out the CPU Heatsink the cpu came out with it. This resulted in bent pins in the outer line of the cpu and 2 bent near the middle. I straightened them to the best of my ability, using a credit card and a needle, to the point where the cpu was going in the socket(AM3+) with no force needed. However after booting up the PC started working but rather slowly. I started plying league of legends but i had a large amount of fps drops and the average fps was 2 times lower than the usual. I tried to run DooM 2016 but it would always freeze when loading the game. I hadn't had time to run other benchmarks  at the moment. Is there anything i can do to resolve this issue?I really want my gaming pc back at full speed ASAP!

 

All help is greatly appreciated!

Thank you in advance! 

 

[Electronics Wizardy]

Normally with bent pings the cpu will work or not work. Its probably something else.

[l3lueapple]

1 minute ago, Electronics Wizardy said:

Normally with bent pings the cpu will work or not work. Its probably something else.

Any ideas? It's not only games, everything is running slower.

 

[Electronics Wizardy]

1 minute ago, l3lueapple said:

Any ideas? It's not only games, everything is running slower.

 

Re insert cpu and ram. Try a different os?

[l3lueapple]

1 minute ago, Electronics Wizardy said:

Re insert cpu and ram. Try a different os?

Thanks i will try. although i don't have a different os at my possession atm

[l3lueapple]

OK finnaly got it. The issue was the ram which for some reason had 4.1gb(out of 8gb) "hardware reserved". Now since that issue is resolved its back up to speed!

[NinjaJc01]

34 minutes ago, l3lueapple said:

OK finnaly got it. The issue was the ram which for some reason had 4.1gb(out of 8gb) "hardware reserved". Now since that issue is resolved its back up to speed!

Mark solved then please.