Nvidia Surround + accessory setup help

[reptileexperts]

Guys and Gals,

 

Running 3 24" 1080p 144hz 3D monitors for my basic surround

 

Added a 27" 1440p 144hz monitor to use as an accessory. 

 

I have all the monitors hooked up and running at 144hz at full resolutions, but I can NOT get it to enable surround. It gives me a connection error. I have it configured exactly as Nvidia recommends. 

 

My accessory is attached via displayport. 

 

2 of my surrounds are attached via displayport

1 of surrounds is attached dual-link DVI (surround did not support 4 display ports for some reason?) 

 

 

Any help?

[reptileexperts]

The error I see

 

 

recommended setup. I am using option 3.

[reptileexperts]

 

How the setup is set up (ignore cable management its getting shifted trying to get the right connections)

[reptileexperts]

 

Traced er all my cables again to verify it. Ran DDU and removed all nvidia applications. Disconnected all monitors and powered down PC. Connected all monitors back but flipped two of the monitors on display ports around (both part of the surround config). Total of three monitors on the top card and one surround monitor on the bottom card running config 5 still. The far left monitor is connected via dual link DVI (dvi can NOT run 1440p at 144hz but it can run 1080p at 144hz). Have no honest idea which part of this fixed it, but when i reopened the window to setup surround it automatically recognized everything and set it up with all 4 monitors running at 144hz! Just an update Incase anyone searches these terms since no one seemed to have an answer.