Jump to content

Installing new cpu

DoctorDaco
 Share
Posted
1 minute ago, DoctorDaco said:

Okay so I have a asus rog maximum viii formula. 

Just installed a new cpu and cooler start up PC. And I'm getting a error of fan speed. All fans are running but in bios it only shows one. 

Any ideas? 

Are the fans 4 pin? some 3 pin fans don't show up in BIOS. Also fan speed errors are fine as long as the CPU temps are okay under load. 

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7913325
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, DoctorDaco said:

Okay so I have a asus rog maximum viii formula. 

Just installed a new cpu and cooler start up PC. And I'm getting a error of fan speed. All fans are running but in bios it only shows one. 

Any ideas? 

 

Some motherboards group multiple fans into a single fan controller, so you only get one dial for multiple fans. So even though I have 4 fans in my system, I only get 3 dials

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7913335
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Brink2Three said:

Are the fans 4 pin? some 3 pin fans don't show up in BIOS. Also fan speed errors are fine as long as the CPU temps are okay under load. 

Okay they are 3 pins.  Problem is it won't let me load os just tells me the error snd I can only run set up 

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7913340
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, DoctorDaco said:

Okay they are 3 pins.  Problem is it won't let me load os just tells me the error snd I can only run set up 

Unplug all fans except for the CPU cooler and see if it boots. if it does then check the BIOS to see if there's a setting where you can ignore the fan error. 

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7913371
Share on other sites
Link to post
Share on other sites
Posted

Are you running a liquid cooler? If so, you need to disable cpu fan monitoring in the bios

My rig:
CPU: i5 4690k 24/7 @4.4ghz (1.165v) Max 4.7ghz (1.325v) COOLER: NZXT Kraken X61 MOBO: Asus Z97-A   RAM: 16GB Crucial Ballistix Tactical   GPU: EVGA GTX 970 SSC   PSU: EVGA GS 650W   CASE: NZXT Phantom 530 HDD: WD Caviar Blue 1TB + WD Black 2TB

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7914018
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, DoctorDaco said:

I am running liquid cooling. 

I tried but I couldn't find that option in the bios. 

https://rog.asus.com/forum/showthread.php?43773-Maximus-Hero-VI-CPU-Fan-Error

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
https://linustechtips.com/topic/612181-installing-new-cpu/#findComment-7914126
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×