Bios stuck on POST

[Uboatfreak]

Hey guys!

So i am having a weird problem with my pc. When i start it up it powers on for 2-3 seconds, then it powes off for 2-3 seconds( the fans stop spinning) then it starts again . It gets to the POST screen with the Gigabyte logo, and it just stays like that. I press any button on the key board and it doesnt do anything, but i can hear a tick from the motherboard buzzer when i press a keyboard button. It stays on the screen for a few minutes, the the screen goes black and it just sits there, doing nothing.

The weird thing is while the post screen shows up the Gpu fans are spinning ( normaly they would spin at the very beginning then once windows starts they stop) and when the screen goes black they stop doing that.

Another weird thing is just the evening before it worked. But when it did work a completely different logo showed up. One with Gigabyte( white on a black background) and to the right it says Ultradurable on a red background. The other post screen is white, with Gigabyte written in black and with a 3d cube next to it.

I recently changed my motherboard, so this one is new. The day i powered it on for the time with this new mb . My pc worked like normal. Btw i did not reinstall windows, i just unistalled the old mb drivers and installed the new ones. Maybe that caused a problem?

I have cleared CMOS for maybe 4-5 times, i tried to boot with only one ram stick and does the same.

CPU: i7 2600
GPU: EVGA GTX 980 SC non-OC
MB: Gigabyte GA-Z77-ds3h rev. 1.1 ( old one was an Asrock P67 Pro3 rev B3
Ram: 16 gb of Corsair XMS3
Psu: Seasonic S12II-620 Bronze 620W
HDD: Samsung Spinpoint F3 1TB 
SSD: Samsung 850 EVO 250 GB
DVD reader: from LG dont remeber the model
Chasis: NOX NX2

Btw, it power it in using a screwdriver bc of an older problem where the pc would power on and off randomly until i pulled the front panel cables off and used the power button on the old mb( the new doesnt have this).

I have Windows 7 Ultimate btw.

[mrgooglegeek]

Sounds like a bios issue to me, if you can flash an update then try that. Your board has dual bios chips, so of there is a jumper or any other way of switching from one to the other then try that.

 

[Djole123]

Tried resetting CMOS?

[Uboatfreak]

Yes. I resetted CMOS like 4 times.

 

Anyway, i took my 980 out then plugged my monitor directly into my motherboard. This time it entered into Bios and showed a message the the Main bios is corrupted and that it is fixing it. After 2 minutes or so it finished that, it entered into BIOS, i reseted the settings to default, then entered Windows in Safe Mode. Now it seems fine. I will reinstall windows and then post here what happens.

 

Thanks for the help anyways!

[Uboatfreak]

Update:

 

I booted my pc up with my 980 back in and it did the same thing again. I pulled my gpu out and plugged the monitor directly into the motherboard, and it booted fine.

 

I will reinstall Windows, hope this will fix things.