Help

[RaveGreg]

Help! got a new chassis today and moved my build over. My computer was functioning completely normally but now every time I turn it on it shuts off after a few seconds, sometimes a little longer.

 

I'm using all the same gear I was using before just in the new chassis, I reset CMOS no change.

 

and yes I double checked the power and reset buttons are working fine.

 

edit: I checked each stick of RAM seperatly aswell

second edit: was able to make it to BIOS before it turned off, my voltages are fine too

[DrMacintosh]

1 minute ago, RaveGreg said:

Help! got a new chassis today and moved my build over. My computer was functioning completely normally but now every time I turn it on it shuts off after a few seconds, sometimes a little longer.

 

I'm using all the same gear I was using before just in the new chassis, I reset CMOS no change.

 

and yes I double checked the power and reset buttons are working fine

Are any wires touching the case? Something might be shorting the board. Take everything out and put it back together. get your cables in order and see if it works. 

[RaveGreg]

8 minutes ago, DrMacintosh said:

Are any wires touching the case? Something might be shorting the board. Take everything out and put it back together. get your cables in order and see if it works. 

Done and same result

Side note: beep code is normal

[DrMacintosh]

1 minute ago, RaveGreg said:

Done and same result

Side note: beep code is normal

take out the GPU? 

[RaveGreg]

no onboard graphics.

[DrMacintosh]

1 minute ago, RaveGreg said:

no onboard graphics.

well you are just having a bad day today then arent you. 

[RaveGreg]

indeed, was so excited for the new case, maybe took 2 hours to move over and now this

[RaveGreg]

Welp, got the pc to stay on. . . but now it wont post