Jump to content

Hello, So I was looking to get a dual monitor setup. One used dvi-d the other displayport, I start up my computer with both of them plugged into the gpu and only the dvi-d monitor is showing anything. The displayport one is saying no signal. If I unplug the dvi-d one, then the displayport one works just fine. When both are plugged in I can not see the displayport one when I search for other displays.

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/
Share on other sites

Link to post
Share on other sites

7 minutes ago, Oshino Shinobu said:

What monitors and GPU are you using? Have you tried using a different connector (either on the DP or DVI monitor) to see if they both work then. 

Gtx 970, Asus PB287Q and Acer V223W. There are no other connectors on the Acer one accept DVI.

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7680823
Share on other sites

Link to post
Share on other sites

1 minute ago, N_Bot said:

Gtx 970, Asus PB287Q and Acer V223W. There are no other connectors on the Acer one accept DVI.

Have you tried a clean install of the GPU drivers? 

I doubt it's a hardware issue, so there's likely something with the drivers or OS that's causing the issue. 

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7680830
Share on other sites

Link to post
Share on other sites

Did you enable the second display in Nvidia control panel?

Right click when on desktop when in windows and select Nvidia Contol Panel. On the left side under the tab Monitor or Display there should be a setting for setting up multiple displays.

MOBO: Gigabyte G1.Sniper M3 | CPU: Intel i7-3770K @ 4.5GHz | GPU: 2x Gigabyte GeForce GTX770 2GB WF3 OC Edition | RAM: Kingston HyperX Blue DDR3-1600 XMP 16GB (4x4GB) | SSD: Intel 530 Series 180GB SATAIII | HDD: WD Caviar Blue 1.0TB SATA III & WD AV-GP 3.0TB SATA IIPSU: Corsair AX 760 | Case: Chieftec DX-02B | CPU cooler:  Corsair H100i with 4 Noctua NF-F12's in Push-Pull | Fans: 3x Noctua NF-S12A Front and Rear-intake, 1x Noctua NF-A14 Bottom-intake, 1x CoolerMaster MegaFlow 200 Side Panel-intake, 1xNoctua NF-F12 Top-exhaust | OS: Windows 7 Ultimate 64-bit | Keyboard: Logitech G510 | Mouse: Gigabyte Aivia Krypton

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7682034
Share on other sites

Link to post
Share on other sites

19 hours ago, Tommex84 said:

Did you enable the second display in Nvidia control panel?

Right click when on desktop when in windows and select Nvidia Contol Panel. On the left side under the tab Monitor or Display there should be a setting for setting up multiple displays.

It doesn't show up.

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7686427
Share on other sites

Link to post
Share on other sites

5 hours ago, N_Bot said:

It doesn't show up.

I read while ggogling it can be a resolution problem.

Does the second display show up if you go to control panel/display/change resolution? If not lower the resolution on the one that is showing and try unplugging and replugging the one that is not working.

MOBO: Gigabyte G1.Sniper M3 | CPU: Intel i7-3770K @ 4.5GHz | GPU: 2x Gigabyte GeForce GTX770 2GB WF3 OC Edition | RAM: Kingston HyperX Blue DDR3-1600 XMP 16GB (4x4GB) | SSD: Intel 530 Series 180GB SATAIII | HDD: WD Caviar Blue 1.0TB SATA III & WD AV-GP 3.0TB SATA IIPSU: Corsair AX 760 | Case: Chieftec DX-02B | CPU cooler:  Corsair H100i with 4 Noctua NF-F12's in Push-Pull | Fans: 3x Noctua NF-S12A Front and Rear-intake, 1x Noctua NF-A14 Bottom-intake, 1x CoolerMaster MegaFlow 200 Side Panel-intake, 1xNoctua NF-F12 Top-exhaust | OS: Windows 7 Ultimate 64-bit | Keyboard: Logitech G510 | Mouse: Gigabyte Aivia Krypton

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7687766
Share on other sites

Link to post
Share on other sites

On 5/3/2016 at 10:37 PM, Tommex84 said:

I read while ggogling it can be a resolution problem.

Does the second display show up if you go to control panel/display/change resolution? If not lower the resolution on the one that is showing and try unplugging and replugging the one that is not working.

Ok thank you. I will try lower the resolution to the other one and see if that works.

Link to comment
https://linustechtips.com/topic/590070-monitors-not-working/#findComment-7695257
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×