Jump to content

Hi guys, 

 

Well, my step dad has just told me off for using one of these in a uk wall outlet. He says that I'm overloading the circuit? I've only got one out of the 2 plugs on (one of the plugs is for that extension brick thing 

 

on the extension cable I have  

1: Pc 

2:xbox one

3:TV

4:Hard drive dock (Rarely use it, I do pull out the plug and put away when not needed) 

5: Laptop charger (Again, unplug and put away when not needed)

6: Iphone 6 charger (with 2 usb extensions for it

 

Is my step dad right or is he talking bollocks? He normally thinks he's right (half the time he talks shit) 

 Uk_13a_double_socket.jpg

 uk-mains-6-way-gang-socket-power-strip-w

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/
Share on other sites

Link to post
Share on other sites

15 hours ago, GeorgeKellow said:

Hi guys, 

I believe most circuits let you connect like 1500-2500 Watts before its overloaded, so I doubt you are overloading it with what is connected
 

but yes it IS possible to overload by connected too many powerful devices, in my room I have 2x 8 gang plugs, my PC system is on one, and my consoles and TV on the other

Desktop - Corsair 300r i7 4770k H100i MSI 780ti 16GB Vengeance Pro 2400mhz Crucial MX100 512gb Samsung Evo 250gb 2 TB WD Green, AOC Q2770PQU 1440p 27" monitor Laptop Clevo W110er - 11.6" 768p, i5 3230m, 650m GT 2gb, OCZ vertex 4 256gb,  4gb ram, Server: Fractal Define Mini, MSI Z78-G43, Intel G3220, 8GB Corsair Vengeance, 4x 3tb WD Reds in Raid 10, Phone Oppo Reno 10x 256gb , Camera Sony A7iii

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7599959
Share on other sites

Link to post
Share on other sites

i am not from uk but i am electrotechnician in france and imo he is saying bs.

Simple fact is power is on "line" linked to your electric board with a main and division switches.

When you do use power you draw power on your line of a division witch is linked to the main.

 

So unless he is using the same line as you do ( wich is related to a bad electric design if it's not the same room)

It's impossible for such a low ammount of hardware to overload the whole house.

 

Idk if i can explain that well in english , but this is how it works in france and i doubts it's different in england.

I wish i could oc my body, during winter overheating would be great.

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7600062
Share on other sites

Link to post
Share on other sites

Next time he tells you that, ask if he's a qualified electrician since I have several extension leads plugged in without any overload issues (short answer, he's talking out of his backside).

 

Also unless that's a generic image you should get extension leads that have surge protection so that it blows instead of your expensive electronics.

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7607750
Share on other sites

Link to post
Share on other sites

All UK connectors have a fuse in them either way. So IF you overload them, then the fuse will go. I think it's a 10A Fuse. A single socket outlet is rated at 13A, and a double socket at 20A.

 

If you're on a 230V line, then you can draw over 2,000 Watt from a single outlet.

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7607807
Share on other sites

Link to post
Share on other sites

A large kettle can draw 2 or 3 KW, there's no way what you're using is drawing that much so now, it's fine.

i7-7700 | Asrock H270M-ITX | Fractal Design Core 500 | 16GB Corsair Vengeance LPX | EVGA GTX 1080 Ti | 850 EVO 500GB | 850 EVO 250GB | WD CavGreen 2TB

EVGA SuperNOVA 550W | Steel Series Elite Prism | Final mouse 2015 | WASD Keyboards V2 (MX Blue) | Acer Predator 1440p 144Hz

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7612864
Share on other sites

Link to post
Share on other sites

On 4/14/2016 at 0:49 PM, GeorgeKellow said:

-SNIP-

It depends how many plugs you have on the circuit and how many things are hooked up to it already but in general you will not overload it with just those items unless there are already some high current devices already on the same circuit.

Link to comment
https://linustechtips.com/topic/581812-uk-electricity-help/#findComment-7613760
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×