Oc help

[KSores]

So I just got a h100i so I decided I wanted to overclock my CPU. Highest overclock I can get it without going over 1.4 volts was 4.5 gigahertz is this good it seems to be fairly stable at 1.375 volt and 4.5 gigahertz. At 4.6 gigahertz and 1.4 volts at blue screens almost instantly when I start rendering a video

[airdeano]

using what app for loading?

using any high MHz RAM (XMP)?

VCCIO on AUTO or 1.875 or better?

[KSores]

5 minutes ago, airdeano said:

using what app for loading?

using any high MHz RAM (XMP)?

VCCIO on AUTO or 1.875 or better?

i am using xmp on my 2666 ram

[airdeano]

what was voltage on 4.3 and 4.4?

turn the RAM to default (2133), but use the 2666 timings and voltage.

find the VCCIO voltage (prolly AUTO) and up the voltage to 1.8500v for now to see if stability returns.

once you get your CPU dialed in, then you can proceed to move the RAM speed back to 2666.

[KSores]

1 minute ago, airdeano said:

what was voltage on 4.3 and 4.4?

turn the RAM to default (2133), but use the 2666 timings and voltage.

find the VCCIO voltage (prolly AUTO) and up the voltage to 1.8500v for now to see if stability returns.

once you get your CPU dialed in, then you can proceed to move the RAM speed back to 2666.

i dont remember what voltage i could got at 4.3 and 4.4.

so ill try to turn the ram to default and fix the vccio so i can oc it higher to like 4.6-7?

[airdeano]

excellent. keep the VCCIO under 1.9500v for cooling and safety.

[KSores]

5 minutes ago, airdeano said:

excellent. keep the VCCIO under 1.9500v for cooling and safety.

are you sure? that is over double the voltage it is set at currently (default)

[runit3]

1 hour ago, KSores said:

are you sure? that is over double the voltage it is set at currently (default)

Sweet christ do not do that! I think he's confused with VCCIN and Haswell @airdeano

 

Follow this guide:

http://www.overclock.net/t/1570313/skylake-overclocking-guide-with-statistics

 

Keep sys agent and VCCIO under 1.25 and ~1.225 respectively.