H220x 2 in fractal design s window

[Deadpool2onBlu-Ray]

So I have determined my case would be a waste without water cooling and plus it looks really cool. The swiftech 220 x2 looks like a good option. Would mounting it to the front work and having it intake air? then putting an intake fan on the bottom to provide good airflow. I have heard this option can be pretty loud though. I don't want to mount it on the top because I want the most sound dampening material as possible. Plus the front half of my case has nothing in it as of right now.  Also, I have a blue build going. If I put the blue uv die in and had a blue led strip, wouldn't the liquid glow blue?

[Ex0Thermic]

Look like it should work. but not 100% sure due to the reservoir it has.
 

[Deadpool2onBlu-Ray]

9 minutes ago, GeekThief said:

Look like it should work. but not 100% sure due to the reservoir it has.
 

I mean on hardware canucks he mounts a normal corsair radiatior to the front no problem 

[Ex0Thermic]

you will have NO problems front mounting any rad

[Deadpool2onBlu-Ray]

5 minutes ago, GeekThief said:

you will have NO problems front mounting any rad

so its not bad for airflow or noise? and the tubing will reach the cpu?

[W-L]

42 minutes ago, Ryan829 said:

so its not bad for airflow or noise? and the tubing will reach the cpu?

Shouldn't be a problem and the tubing on their units are reasonably long and will reach, only orientation the unit you can't mount it in is at the bottom or upside down. The fluid though will not glow blue with the dye or blue LED's for that you need UV based dye of fluid in the unit with UV lights for it to light up and give off that glow.