Pc shuts down after booting

[KingPho]

When I turn on my pc it shuts down after a couple of seconds after booting, somethmes the blue screen of death will come up then shut down my pc this started happening after installing new fans to my radiator and removed my rear exhaust fans and 1 front intake fan, when I leave my pc off after an hour I tried again then my cpu temp is at 90-100, I can max out the cpu fan rpm to max and pc will still shut down need helpasap please

[cookiemelon]

90-100 is really dangerous.

what are the specs

[cookiemelon]

90-100 is really dangerous.

what are the specs

check if you have the right radiator standoffs, did you use thermal paste, everything tightly connected?

[KingPho]

5 minutes ago, cookiemelon said:

90-100 is really dangerous.

what are the specs

check if you have the right radiator standoffs, did you use thermal paste, everything tightly connected?

 

I didnt even remove the cooler off the cpu, I just removed the radiator from the case to add the new fans Case - NZXT H440 Red/Black 
Motherboard - MSI Z97 Gaming 3 
Processor - Intel Core i5-4690K Devil's Canyon 
CPU Cooler - Corsair Hydro Series H100i GTX Extreme
Hard Drive 1 - Seagate Barracuda 1TB 
Hard Drive 2 - Toshiba 1TB 
Hard Drive 3 - Western Digital 250GB 
Solid State Drive - Samsung 850 Evo 250GB 
Solid State Drive - Corsair Force 3 120GB 
Memory Ram - G.SKILL Ripjaws X Series 16GB 
Graphics Card - ASUS Strix GeForce GTX 970 
Power Supply - Thermaltake Smart Power 550W 
Cooling Fans - 2x Noctua NF-F12, 2x Cooler Master SickleFlow, 2x DeepCool XFan L/B

 

[KingPho]

Just now, KingPho said:

 

I didnt even remove the cooler off the cpu, I just removed the radiator from the case to add the new fans Case - NZXT H440 Red/Black 
Motherboard - MSI Z97 Gaming 3 
Processor - Intel Core i5-4690K Devil's Canyon 
CPU Cooler - Corsair Hydro Series H100i GTX Extreme
Hard Drive 1 - Seagate Barracuda 1TB 
Hard Drive 2 - Toshiba 1TB 
Hard Drive 3 - Western Digital 250GB 
Solid State Drive - Samsung 850 Evo 250GB 
Solid State Drive - Corsair Force 3 120GB 
Memory Ram - G.SKILL Ripjaws X Series 16GB 
Graphics Card - ASUS Strix GeForce GTX 970 
Power Supply - Thermaltake Smart Power 550W 
Cooling Fans - 2x Noctua NF-F12, 2x Cooler Master SickleFlow, 2x DeepCool XFan L/B

 

 

[cookiemelon]

Just now, KingPho said:

 

I didnt even remove the cooler off the cpu, I just removed the radiator from the case to add the new fans Case - NZXT H440 Red/Black 
Motherboard - MSI Z97 Gaming 3 
Processor - Intel Core i5-4690K Devil's Canyon 
CPU Cooler - Corsair Hydro Series H100i GTX Extreme
Hard Drive 1 - Seagate Barracuda 1TB 
Hard Drive 2 - Toshiba 1TB 
Hard Drive 3 - Western Digital 250GB 
Solid State Drive - Samsung 850 Evo 250GB 
Solid State Drive - Corsair Force 3 120GB 
Memory Ram - G.SKILL Ripjaws X Series 16GB 
Graphics Card - ASUS Strix GeForce GTX 970 
Power Supply - Thermaltake Smart Power 550W 
Cooling Fans - 2x Noctua NF-F12, 2x Cooler Master SickleFlow, 2x DeepCool XFan L/B

 

is there any knots in the tubes, is there too much voltage, i dont think fans would really effect heat that much 

[KingPho]

9 minutes ago, cookiemelon said:

is there any knots in the tubes, is there too much voltage, i dont think fans would really effect heat that much 

No knots, to me the way I look at it, it's like the liquid is not flowing because im honestly maxing the rpm on the radiator but on the cpu it's no change but just getting hotter, you think it's the water pump in the cooler? 

[cookiemelon]

if it is an All in one. yes