Overclocking problem ? Or doing it wrong!

[polacing]

Hello everyone, As you see im new to the Overclocking world and Im trying to overclock my new I7 6700k on a water cooled system. I tried a simple 4.5ghz ( which for me seems pretty ok for this chip ). I used 45 in the multiplier and a Voltage of 1.325v. The thing is I run Intelburn Test and it runs smooth ( 10 minutes ) then I run  HeavyLoad stress test for about 20 minutes and everything is fine. I can browse the web and play diablo no problem. But as soon as i hop into Just case 3, GTAV, or Any other graphic demanding game I get a Bsod with whea uncorrectable error. When i put the speed to Stock ( 4.0 and 4.2 boost )  the games run smooth.

 

Im running windows 10

motherboard Msi gaming M5 

I7 6700k

Trident Z 16gb at 3200

Gtx 980 FTW edition.

Thanks  

[Curufinwe_wins]

http://www.tweaktown.com/guides/7481/tweaktowns-ultimate-intel-skylake-overclocking-guide/index10.html

[polacing]

6 minutes ago, Curufinwe_wins said:

http://www.tweaktown.com/guides/7481/tweaktowns-ultimate-intel-skylake-overclocking-guide/index10.html

Thank you very much! <3 Ill give it a try! 

[incarnate]

10 and 20 mins are nowhere near long enough to get a good sense of stability. For your final overclock stress test, run it for at least two hours. I personally use 2 hours in occt to validate my overclocks, and I never had a bsod on an oc that passed that test.

[polacing]

after all this time everything was going good, Until just now where i was trying to stream and play at the same time. ( streaming rust ) I got the same error again at 4.5ghz and 1.340Vcore. IDk what to do. Eeven running the cpu in stock settings the Vcore goes up to 1.410 sometimes when boosted.