Please help

[apple_dat]

I just finish build my gaming rig.every time I turn on the the pc everything lights up, fans are spinning,Gpu light up and fans are spinning,but when I power on the pc am getting black screen all the time. Please help

Pc parts

Motherboard-msi gaming 970

Ram-gskill 2x4g

Gpu-r9 390

Cpu-fx 8350

[SwiftCraftmc]

What hard drive do you have?

[SwiftCraftmc]

Make sure all hard drive connections are in propably

[apple_dat]

Make sure all hard drive connections are in propably

I have a seagate 1tb

[NanoTech56]

is your moniter plugged in to your GPU or  motherboard? because it should be plugged into the GPU

[apple_dat]

is your moniter plugged in to your GPU or  motherboard? because it should be plugged into the GPU

Yes I have it in the Gpu

[monjanger]

is your moniter plugged in to your GPU or  motherboard? because it should be plugged into the GPU

Hehe, I remember when I made this mistake on my first PC. I also did not know you had to press the power button on the case, I thought you just had to flip the switch on the PSU. 

[_SNOWMAN_]

 

Does the motherboard logo show up?

[apple_dat]

Does the motherboard logo show up?

The screen just goes black soon I power it up

[_SNOWMAN_]

The screen just goes black soon I power it up

I assume it stays running but nothing on the screen. Maybe try to take out the graphics card and hook monitor to the MB

[apple_dat]

I assume it stays running but nothing on the screen. Maybe try to take out the graphics card and hook monitor to the MB

The mobo don't have a display port

[_SNOWMAN_]

The mobo don't have a display port

Oh..... do you have an extra monitor you can plug into mobo? If you do and it still doesnt work, I would assume you have power supply issues. Check all connections too. When I build mine I had a pin that was pushing out of its plug. 

[LabRat]

can't plug a monitor into the board.

[LabRat]

you said displayport.......... do you have anhdmi cab'e or dvi cABLE?

[apple_dat]

you said displayport.......... do you have anhdmi cab'e or dvi cABLE?

I only have a hdmi Cable

[LabRat]

flip the cable around see what happens.

[LabRat]

guess i gotta ask........... flip the power switch on the back of the monitor?... ( where you hook the cables in )

[apple_dat]

flip the cable around see what happens.

Same thing

[apple_dat]

Same thing

Yes the monitor coming on when I power the system but the screen got black after like 2 or 3 sec

[LabRat]

use 1 ram stick in the farthest slot from the cpu and do a cmos reset. boot.

 

short of breadboarding i can't think of too much right now.

 

you lifted the lever before setting the cpu in?  no bent pins?  arrows lined up?

[apple_dat]

Everything placed right don't know what wrong