Final cables help

[Axno]

Questions:

- Can I connect the fans on the radiator straight to the PWM hub instead of the connections coming out of the pump? Does this changes anything if either way?

-There is a sata cable coming out of my pump, where the hell does that go, do I need it? It's large so it doesn't exactly fit in many places. 

- I have a water pump (w_pump) 4 pin on my mobo, can I connect a 3 pin coming out of my pump to that?

- Pump has a 10-1, with only 4 pins on it. I don't know where it can go, apparently it's USB 2 but the only one i have left is the ROG_EXT and it still doesn't work with the pins.

- Also what does the sata looking cable coming out of the PWM hub connect to?

 

Cooler is the X61 Kraken (AIO) just btw

 

- Where do you get a T_sensor connector so I can monitor temps? Is it separate or what?

 

I can post pics if someone needs clarification/visual.

 

First time building is one hell of an experience... I just want a computer...

[NotMe]

I'm pretty certain that the sata connector coming out of the hub is to power the fans.  Also, what pump have you got? I can't really give you an accurate answer with out knowing that.

[Axno]

I'm pretty certain that the sata connector coming out of the hub is to power the fans.  Also, what pump have you got? I can't really give you an accurate answer with out knowing that.

X61 Kraken AOI

[NotMe]

X61 Kraken AOI

Just found this from an article, may help you a bit I guess. "

Before we leave the head unit, we also wanted to spread out the wiring to see what is needed to connect. The three-pin pump power lead is nine inches long, the fan lead is ten and a half inches long, with a similar length to the SATA plug that comes from it. To gain control of the AIO, you also need to run the twenty-four inches of USB 2.0 cable, and connect it to the motherboard."