Case shields or whatever there called

[cakez]

Hello,for my upcoming build I will be using a Casleabs SMA8 but  it's a complete square which I find ugly ,so  is it possible to get a custom shield like the NZXT Noctis 450 or whatever it's called ,that fits the SMA8

[Aytex]

like a DIY? b/c I don't think people make custom exterior chassis's only

[cakez]

like a DIY? b/c I don't think people make custom exterior chassis's only

a diy or a custom one from a company if possible;D

[W-L]

a diy or a custom one from a company if possible;D

 

You mean the plastic body pieces those are custom designed for each case if you want to do something like that your going to need a lot of time and patience to make something instead. Personally I would rather have steel or aluminum over plastic however.

[LukaP]

well you can always think of a design and have it CNC cut and welded together... but otherwise there are flashy cases that are all metal (Storm Stryker springs to mind)

[cakez]

You mean the plastic body pieces those are custom designed for each case if you want to do something like that your going to need a lot of time and patience to make something instead. Personally I would rather have steel or aluminum over plastic however.

I know it'll take a long tome but I really want it so where can I get it?

[W-L]

I know it'll take a long tome but I really want it so where can I get it?

Well as said you would need to make it or say use case parts from Corsair or other manufacture's as a base to create the look you want, there isn't really a place that will make something for it. For raw materials stuff like aluminum and sheets of acrylic can be milled and shaped to the look and size you need as LukaP mentions.

[cakez]

Well as said you would need to make it or say use case parts from Corsair or other manufacture's as a base to create the look you want, there isn't really a place that will make something for it. For raw materials stuff like aluminum and sheets of acrylic can be milled and shaped to the look and size you need as LukaP mentions.

that's gonna be hard... I hope somehow I can ask caselabs to do that which they probably won't  ,if they don't then somehow I'll make my own 

[cakez]

Well as said you would need to make it or say use case parts from Corsair or other manufacture's as a base to create the look you want, there isn't really a place that will make something for it. For raw materials stuff like aluminum and sheets of acrylic can be milled and shaped to the look and size you need as LukaP mentions.

yess found a website that makes custom cases

[W-L]

yess found a website that makes custom cases

Singularity does do custom stuff but yeah it's going to cost a fair bit, just to mention.

[cakez]

Singularity does do custom stuff but yeah it's going to cost a fair bit, just to mention.

yeah figured

[cakez]

Singularity does do custom stuff but yeah it's going to cost a fair bit, just to mention.

do you think singularity does a good job?

[W-L]

do you think singularity does a good job?

I've followed a few builds before on their YouTube channel and they take a lot of attention to detail, not to mention a new shop now, check them out and see if there is stuff you like from it or to give you some ideas for the design.

[cakez]

I've followed a few builds before on their YouTube channel and they take a lot of attention to detail, not to mention a new shop now, check them out and see if there is stuff you like from it or to give you some ideas for the design.

thanks for the help:D

[cakez]

Singularity does do custom stuff but yeah it's going to cost a fair bit, just to mention.

do you think I should make something like an SMA8 and just adjust  it to fit my needs or make a completely different design?

[W-L]

do you think I should make something like an SMA8 and just adjust  it to fit my needs or make a completely different design?

 

It would probably be best to say start with a base to go upon and mod from there since it will give you on idea of everything to and scale of it.

[cakez]

It would probably be best to say start with a base to go upon and mod from there since it will give you on idea of everything to and scale of it.

thank you