Jump to content

1. Make sure that your monitor is plugged into the GPU and not your mobo.

2. Make sure monitor is set to correct input.

3. Make sure that your GPU has power cable(s) connected from the PSU.

4. Make sure that your BIOS settings are set to discrete GPU instead of APU (not sure if AMD boards do this, but intel ones sure do)

When in doubt, re-format.

Link to post
Share on other sites

If you search for the beep codes of you mainboard / BIOS you could figure out whats wrong.

Without knowing, thats exactly wrong, I would suggest reseating your grafics card and check that it is fully locked into the connector.

Also make sure, that your Power Supply is able to handle that card. Also does the APU output, if you take the card out of your system?

~ ThxAndBye

"You should remove any cats from the vicinity, because cats will cause all kinds of problems during CPU installation." -Linus

Link to post
Share on other sites

Help your new graphics card?

 

(referring to the title ;) )

#RIPTopGear  This is the best thread ever: http://linustechtips.com/main/topic/53190-i-can-not-get-hard/ " French meetings are just people sitting in a semi-circle shouting at each other" -Dom Jolly  :lol:

My rig: 

   CPU: Pentium G3258 @ 4.5GHz GPU: GTX 760 reference | PSU: Corsair RM750 Cooler: Cooler Master Seidon 120V | Motherboard: Gigabyte B85M D3H | Case: NZXT S340 White | RAM: 8GB EVO Potenza @ 1600MHz Storage: 3TB Seagate HDD, 60GB OCZ SSD, 620GB Toshiba HDD | Mouse: Steelseries Rival @1000 CPi |  OS: Windows 10 Pro Phone: iPhone 6S 16GB  
http://linustechtips.com/main/topic/439354-why-nvidia/
 
Link to post
Share on other sites

I bought this graphics card second hand is inserted correctly and the power is fine the fans run that's good I havent got a driver disk so there's no drivers should I take it out then download drivers and put it back in

no should start anyway and be usable, try another pci-e slot

i7 5820K @ 4.4GHz | Evga GTX 980ti Superclocked | MSI X99 Sli Plus | 16GB Crucial Ballistix DDR4 | EVGA 850W Gold+ | 2TB HDD and 250GB SSD

NZXT Phantom 530 | Corsair H100i GTX | 

Link to post
Share on other sites

I bought this graphics card second hand is inserted correctly and the power is fine the fans run that's good I havent got a driver disk so there's no drivers should I take it out then download drivers and put it back in

Sure it worked before you paid for it?

It's not a race to the bottom.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×