Jump to content

The last few weeks my computer has been turning itself off without warning, it didn't do it often at first, but now it's doing it almost every day; it doesn't say shutting down or anything, the screen just goes black and the fans on my computer turn off. My LEDs on my motherboard stay on so I'm thinking that it's not a PSU problem. None of my parts are overclocked and my temps are fine. I've only noticed it when I'm on CSGO, but then again that's all I do when I'm on my computer. All of my drivers are up to date as well. 

 

 

Case: NZXT H440

Motherboard: Asus Maximus Hero VII

CPU: i7 - 4790K

CPU Cooler - Corsair H100i Liquid Cooling

GPU: 2x Evga GTX 970

Ram: Mixed 32 GB (16Gb GSkillz Ripjaw - 16Gb Dell Crap)

HDD: 2 Tb

SSD: 4x 250 GB (2x Samsung 840 Evo - 2x PNY)

 

 

CPU: Ryzen 5 5600 Motherboard: MSI B550 Tomahawk RAM: 32Gb DDR4  GPU(s): MSI 6800-XT Case: NZXT H440 Storage: 4x 250gb SSD + 2TB HDD PSU: Corsair RM850x with CableMod Displays: 1 x Asus ROG Swift And 3 x 24" 1080p Cooling: H100i Keyboard: Corsair K70 RGB Mouse: Corsair M65 RGB Sound: AKG 553 Operating System: Windows 10

 

Current PC: 

http://i.imgur.com/ubYSO3f.jpg          http://i.imgur.com/xhpDcqd.jpg

Link to comment
https://linustechtips.com/topic/424179-computer-turning-itself-off/
Share on other sites

Link to post
Share on other sites

Could be a bad PSU or your mixed RAM.  

I've had the ram for about 8 months now, mixed, so would it be possible that it just starts doing that now?

CPU: Ryzen 5 5600 Motherboard: MSI B550 Tomahawk RAM: 32Gb DDR4  GPU(s): MSI 6800-XT Case: NZXT H440 Storage: 4x 250gb SSD + 2TB HDD PSU: Corsair RM850x with CableMod Displays: 1 x Asus ROG Swift And 3 x 24" 1080p Cooling: H100i Keyboard: Corsair K70 RGB Mouse: Corsair M65 RGB Sound: AKG 553 Operating System: Windows 10

 

Current PC: 

http://i.imgur.com/ubYSO3f.jpg          http://i.imgur.com/xhpDcqd.jpg

Link to post
Share on other sites

I've had the ram for about 8 months now, mixed, so would it be possible that it just starts doing that now?

 

Things change over time as parts "wear". I'm not saying it's likely but one stick could be fine with 1.50V and the other could start needing something closer to 1.55V and communication between them being off, things just go wrong when one calls for lower voltage. Who knows with these things.

 

Since it goes down so suddenly, it's got to be related to either power or temperatures. Everything else is not critical enough to skip warnings. My guess is a bad PSU.

Link to post
Share on other sites

Things change over time as parts "wear". I'm not saying it's likely but one stick could be fine with 1.50V and the other could start needing something closer to 1.55V and communication between them being off, things just go wrong when one calls for lower voltage. Who knows with these things.

 

Since it goes down so suddenly, it's got to be related to either power or temperatures. Everything else is not critical enough to skip warnings. My guess is a bad PSU.

Ok, I would say that too since my temps are fine. I'll just buy a new PSU I guess!

CPU: Ryzen 5 5600 Motherboard: MSI B550 Tomahawk RAM: 32Gb DDR4  GPU(s): MSI 6800-XT Case: NZXT H440 Storage: 4x 250gb SSD + 2TB HDD PSU: Corsair RM850x with CableMod Displays: 1 x Asus ROG Swift And 3 x 24" 1080p Cooling: H100i Keyboard: Corsair K70 RGB Mouse: Corsair M65 RGB Sound: AKG 553 Operating System: Windows 10

 

Current PC: 

http://i.imgur.com/ubYSO3f.jpg          http://i.imgur.com/xhpDcqd.jpg

Link to post
Share on other sites

Ok, I would say that too since my temps are fine. I'll just buy a new PSU I guess!

 

If you want to look into it more, there's a voltage monitor in Asus BIOS that could give a hint if there's fluctuation or deviation in the voltages. But it's not under load so it can definitely seem fine. I can't remember if there's a voltage monitor in the asus OC suite but there is one in HWMonitor http://www.cpuid.com/news/39-hwmonitor-1-28.html If I remember correctly it can even be set to log to a text file. So when your computer crashes, you could reboot and go back to see what the voltages were at the last second it was still on. 10% deviation from nominal is still within range but a volt or two off is usually a dead giveaway.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×