Upgrading my LAN Party Rig

[CobaltMK33]

So, I've got this computer that I threw together using parts that I had left over from my main build. Since my main computer has a large case, I decided to go with a smaller build so I could take it to friend's houses when we do our get-togethers. Basically, it has a Micro-ATX motherboard, and the BitFenix Prodigy M was just confirmed to be launched on August 15th. So, that's what I'm going to do. Since I'll be paying more attention to it, I've decided to upgrade it to my liking. Any suggestions on what to do first? The build is listed below, but obviously I don't have the Prodigy M yet.

 

LAN Party Rig: FX-4100 || EVGA 550 Ti || ASUS M5A78L-M LX PLUS || Cooler Master 430 Elite (BitFenix Prodigy M) || 8 Gb Crucial Ballistix || Antec HCG 400 || Cooler Master Gemin 2 

 

Also, I want to keep it as balanced as I can, so take that as you may. Thanks in advance!

 

 

[Bluejay0]

I have that case :D

 

 

Good luck on the build. Use a modular PSU for better organization ;)

[CobaltMK33]

I have that case :D

 

 

Good luck on the build. Use a modular PSU for better organization ;)

 

The Prodigy? I figured I might have to, but any other tips for me? Hopefully you've seen how the M will be set up compared to the normal version.

[Bluejay0]

The Prodigy? I figured I might have to, but any other tips for me? Hopefully you've seen how the M will be set up compared to the normal version.

 

Keep the case and the insides clean and stable for minimal movement and possibly breaking something. Use a very light cooler and if possible a light graphics card to minimize the sway weight.

[SSOB]

Buget?

[CobaltMK33]

$400 at the most for upgrades, and that doesn't include the case.

[ShadowRaven]

$400 at the most for upgrades, and that doesn't include the case.

we have purpose and budget.  Question ? any of the parts bought already

[CobaltMK33]

Yes, all of them are bought except for the Prodigy, of course.

[Bluejay0]

What i recommend is to have a very light GPU to reduce the weight and movement or stabilize one with strings or brackets

[ShadowRaven]

Question ?? How much budget towards the prodigy M

[Bluejay0]

Question ?? How much budget towards the prodigy M

 

I'd say approximately 1200$ USD for headroom in components. Considering that the Prodigy is like 100$ ish

[CobaltMK33]

I'd say approximately 1200$ USD for headroom in components. Considering that the Prodigy is like 100$ ish

Easy there, I've got everything already. The case will be sub-100 dollars.

[Bluejay0]

Easy there, I've got everything already. The case will be sub-100 dollars.

 

Whoops. Forgot that! Well Might as well upgrade the card. The rest can last a few more.

[CobaltMK33]

Any suggestions? The 760 is tempting but a little too costly for me.

[CobaltMK33]

Oh, and a blower style fan of course would be best!

[Bluejay0]

Oh, and a blower style fan of course would be best!

 

The 660? It's cheaper and it preforms well. Though a 7950 is cheaper than the 760 but with a bit of tweaking can outpreform a stock clocked 760.

[ShadowRaven]

I'd say approximately 1200$ USD for headroom in components. Considering that the Prodigy is like 100$ ish

Thank you Bluejay

 

Easy there, I've got everything already. The case will be sub-100 dollars.

I have look on the web and nobody is caring it even bitfenix doesn't even mention  the Prodigy mico atx case on their website you use what you have for now

[Bluejay0]

Thank you Bluejay

 

I have look on the web and nobody is caring it even bitfenix doesn't even mention  the Prodigy mico atx case on their website you use what you have for now

 

II only suggested that for new components. Since he's not, might as well trash my previous comment.

[CobaltMK33]

Thank you Bluejay

I have look on the web and nobody is caring it even bitfenix doesn't even mention the Prodigy mico atx case on their website you use what you have for now

Here's the post I found, not to mention they showed it at Computex:

http://linustechtips.com/main/topic/41068-bitfenix-prodigy-m-confirmed-release-date/page-2#entry538893

[Bluejay0]

Here's the post I found, not to mention they showed it at Computex:

http://linustechtips.com/main/topic/41068-bitfenix-prodigy-m-confirmed-release-date/page-2#entry538893

 

Seems nice for not being ITX ;) 

[ShadowRaven]

Until the drums of the internet jungle tell me and I rechecked for any drum release from bitfenix

 

Here's the post I found, not to mention they showed it at Computex:

http://linustechtips.com/main/topic/41068-bitfenix-prodigy-m-confirmed-release-date/page-2#entry538893

 

  I  understand your conviction but like many things it could be a sirens song

[CobaltMK33]

Okay even if I don't get the case this month, would the 660 have enough performance boost over the 550 Ti to make it worth upgrading?

[ShadowRaven]

Yes it cold be a small or medium boost depending on the manufacturer of the gpu but I suggest don't just look at facts & figures because that can always change,  look at it as will it last for the next 3 to4 years or until I can afford to upgrade again

 

Okay even if I don't get the case this month, would the 660 have enough performance boost over the 550 Ti to make it worth upgrading?

[CobaltMK33]

Alright, that'll do. Thanks!