Cathode Lighting tips

[Cade_Tonner]

Needs some tips on where i could put some cathodes in a Corsair  750d. I also wanted to see some examples or thoughts on how i could hide the wires plus adapter. Oh I am trying to hide the lights so its not to hard on the eyes. 

[Bensemus]

A basic thing you could do is put one tube right at the top, against the side with the window and one on the bottom, also against the window. I forget how big the "bezel" is on the windowed panel so I'm going off the assumption that it's big enough to hide the tubes. If not hopefully someone else has a better suggestion

for the cables route them behind the mobo tray.

[Altecice]

I would advise agents using cathodes, stick to LED's

[AddonCustoms]

I agree with Altecice, LEDs last longer, use less power and are brighter.
 
If you decide to get LEDs, you can check out my LED store located -HERE- 
Forum member Lays did a quick review in this topic - Click Here, and forum member jtai117 uses them in his computer, you can see the pictures he posted here - Click Here -
All LED strips are hand made by me and almost everything is customization, from power cable length (10cm to 2 meters), to connector type(3pin fan* or 4pin molex*), the power cable is also sleeved in High Density Black Paracord.

 

If you have any questions feel free to ask me here or in a private message.

[Cade_Tonner]

I agree with Altecice, LEDs last longer, use less power and are brighter.

 

If you decide to get LEDs, you can check out my LED store located -HERE- 

Forum member Lays did a quick review in this topic - Click Here, and forum member jtai117 uses them in his computer, you can see the pictures he posted here - Click Here -

All LED strips are hand made by me and almost everything is customization, from power cable length (10cm to 2 meters), to connector type(3pin fan* or 4pin molex*), the power cable is also sleeved in High Density Black Paracord.

 

If you have any questions feel free to ask me here or in a private message.

Do i need some kind of adapter with most LEDS like a Molex 

[AddonCustoms]

Do i need some kind of adapter with most LEDS like a Molex 

Our LED strips are made to be instantly plugged into your PC.

When ordering you need to select which connector you would like to use (either a 4pin molex or a 3pin Fan) you will also need to check you have a spare connector in your PC (same type as the one you chose for the LED strip).