4930k oc questions

[Zet]

so i'm not some super pro overclocker, can run it on 3.8ghz stable with fairly low core voltage, but cant seem to make the jump to 4ghz or higher

 

any suggestions? 

 

Corsair CS 750M

Gigabyte X79-UD3

Kingston x4 DDR3 HyperX 1600MHz 4GB HyperX Genesis

Gtx 770

4930k

 

 

[cesrai]

Up the voltage and monitor temps.

[Zet]

running at 1.260v on 3.8ghz stable i tried up it all the way 1.380v just for 4ghz but then i cant even boot up windows/crash while just browesering web

 

 

temps are fine though 

[Sauron]

1,38v is too high, avoid going above 1.3 if possible.

 

You probably just got a bad overclocker. It can happen, there isn't much you can do unfortunately. By the way, what do you mean with "fine temps"? It should stay below 80c if at all possible.

[Zet]

well from what i could monitor at around 1.340v at 4ghz it was around 60 at ~50%~ load

 

but bsod after a small while

 

and i didnt just go from 1.260 to 1.380, i have tried pretty much anything in between

[SloppyJostler]

I also have tried OC my 4930k in using an asus rampage black edition board with 32gb ram 2400 kit and it runs at 3900 stock so it says in bios but on box its 3.4, I am new to computers I can build them but overclocking and other functions is what I am learning at present, my cpu is custom water cooled my gpu is an amd r9 295x2 and I have a 4k monitor and I cannot utilize best of speeds for this, any help would be good many thanks in advance.