No Output from Integrated Graphics

[MrSourNinja]

Hey guys I am trying to switch off of a 7600 gs to the integrated graphics on an i5 3470. Problem is that the mobo is an AsRock B75 M2 and while according to the manual (page 52): ftp://66.226.78.21/manual/B75M%20R2.0.pdf you can change to integrated as your display driver. I am not allowed to have that option apparently. Also my bios is missing quite a few options when compared to the manual. And yes I am running the latest firmware 1.60. Any Ideas? 

 

My BIOS: http://imgur.com/ygFqxPw

[humpingpandas]

I was always under the assumption that integrated graphics are disabled when an external GPU is installed.

[GzeroD]

I was always under the assumption that integrated graphics are disabled when an external GPU is installed.

not usually.

[MrSourNinja]

I was always under the assumption that integrated graphics are disabled when an external GPU is installed.

I want to remove the gpu anyways, but if I do I end up not receiving a signal from the motherboard output connectors.

[MrSourNinja]

You can set iGPU as default or clear CMOS when you remove the dGPU

There is no iGPU option and tried to clear the CMOS and I know it cleared because I had to reset date and time but I still couldn't get an output without a dGPU.

[GzeroD]

What cpu are you using?

[MrSourNinja]

What cpu are you using?

3470

 

 

What port are you using?

I've noticed in a Q1900B-ITX (made by asrock aswell) that It'll boot from VGA, it didn't show up any video till windows booted

I've tried D-SUB and HDMI

[MrSourNinja]

I didn't mean via Battery removal... don't you have a jumper?

Yes I do but I cant get at it to remove it. I don't wana shove something down there to try and pry it up because I could scratch the board. Ideas on how to get it up?

[MrSourNinja]

Do you have one of these?:

I'll look. 

[MrSourNinja]

I'll look. 

I found one. Cleared cmos by moving onto the other pins, waiting 15 seconds and then moving it back. I plugged D-SUB into motherboard port and turned on PC. Still no signal to monitor but the PC remains on.