Someone find me right angle fitting?

[TBNRunity]

Could someone find me two different 90 degree fittings. I need one 3/8" 90 degree fitting with compression fittings on both sides and one with a compression fitting on one side and threads on the other to connect to a radiator. 

This is the tubing i need it to connect to. http://www.primochill.com/product/primochilll-12in-rigid-acrylic-tube-24in-clear-4-pack/

[Bosco]

Look up bitspower 90 degree fittings they should be what you are looking for but just make sure to either get the ones that are g1/4 threads with no fittings and add primochill fittings or swap your tubing to 12mm instead of 1/2 inch (1/2 inch is 12.7mm) 

[W4RL0K]

Swiftech do a nice 90 degree articulated fitting. It has a male thread on one end to attach onto a rad or other component in your loop. i.e reservoir, gpu block etc, and a female thread at the other end where you can attach another fitting to it.

 

They are't cheap but the sure do look nice.

 

http://www.aquatuning.co.uk/water-cooling/fittings/adapters/14796/swiftech-angled-adaptor-90-dual-revolvable-g1/4-inner-thread-to-g1/4-outer-thread-lok-seal-black?c=2662

[EK Luc]

Since it's Primochill acrylic tubing, you will need to use Primochill compression fittings.  

 

So what you need is a 90 female/female like this for example : http://www.frozencpu.com/products/21905/ex-tub-2297/Bitspower_G14_Thread_90-Degree_Female_to_Female_Fitting_Adapter_-_Carbon_Black_BP-CB90DIG14.html?tl=g30c101s1306....then you put your primochill compression fittings on each end.

 

And for the one on your rad is this one for example : http://www.frozencpu.com/products/23512/ex-tub-3035/Bitspower_G14_Thread_90-Degree_Rotary_Adapter_-_Carbon_Black_BP-CB90R.html?tl=g30c101s1306....that you again put one primochill compression fitting on it.