Jump to content

Hey guys

 

I have overclocked my GPU (GTX 780) yesterday to an overclock of 1GHZ+ on my memory and an +180MHz on the GPU core. Now I have to say that I am running a triple screen setup. Today I was benchmarking my graphics card with 3dMark (the test ran only on my middle screen, out of three), when suddenly my right monitor, the one I wasnt benching on, turned full of artifacts. In panic I shut down my system, thinking that my overclock went out of control. But when I started up the system again, the screen stayed wrecked. I tried it on a different computer to test wheter it was my gpu that was defect, but the monitor was wrecked on the other system too. So I bought a new one today but I now fear, that when I overclock my graphics card again, it will wreck some of my monitors again. 

 

Can this happen due to a bad overclock? (My temps were ok, I was monitoring when it happened) or was it just a screen-failure, that had nothing to do with my GPU? I really hope you can answer me that question, because I liked overclocking and I hope that I am able to do it again.

Link to comment
https://linustechtips.com/topic/28663-can-i-overclock-my-gpu-again/
Share on other sites

Link to post
Share on other sites

@Denoxx

 

to the best of my knowledge a bad gpu overclock can't actually destroy a monitor.

 

overclocking the monitor to high refresh rates can however cause adverse effects on the lifespan of the monitor.

there are some scenarios where gpu overclocking could kill a monitor,though they're mostly jokes.

 

ex.

you're overclocking your GTX 780 on a Dell OEM 400 watt power supply with no overvolt protection,after a while the power supply catches fire,burns your computer and then fire starts coming out of the vents on the side of your sidepanel that torch the display. 

Linus Sebastian said:

The stand is indeed made of metal but I wouldn't drive my car over a bridge made of it.

 

https://youtu.be/X5YXWqhL9ik?t=552

Link to post
Share on other sites

Artifacts are not monitor problems. Lower your clock, most probably unstable speeds. 

he tested it on a different system,it was the monitor.read the entire post.

Linus Sebastian said:

The stand is indeed made of metal but I wouldn't drive my car over a bridge made of it.

 

https://youtu.be/X5YXWqhL9ik?t=552

Link to post
Share on other sites

I have no idea how overclocking a Video Card could wreck your monitor. It's not possible.

 

There are 3 reasons why you might be observing this:

 

-You overclocked a bit too much, and as usual, artifacts showed up. What doesn't make it usual is that the artifacts stayed after you restarted your PC, but were gone when you changed your monitor. I would suggest trying back your old one, and see if the problem persists.

 

-You have damaged the HDMi output hardware port due to overclocking. This is possible, but very, very rare. Though still possible. (maybe when u changed monitors you used another port/VGA-out)

 

-With the GTX780, it's actually possible to overclock your Monitor screen, which destroys it in some cases. Maybe you turned up the refresh rate accidentally, and by that, your monitor was burned out?

 

 

I suggest lowering your clocks, and trying out the old monitor in a different Port than the one you used the first time to ensure that it is still working.

I

Link to post
Share on other sites

Oh i thought he used another monitor, derp

well he bought another monitor,so he did use a different monitor after having tested the dead monitor on a different system.

Linus Sebastian said:

The stand is indeed made of metal but I wouldn't drive my car over a bridge made of it.

 

https://youtu.be/X5YXWqhL9ik?t=552

Link to post
Share on other sites

I have no idea how overclocking a Video Card could wreck your monitor. It's not possible.

 

There are 3 reasons why you might be observing this:

 

-You overclocked a bit too much, and as usual, artifacts showed up. What doesn't make it usual is that the artifacts stayed after you restarted your PC, but were gone when you changed your monitor. I would suggest trying back your old one, and see if the problem persists.

 

-You have damaged the HDMi output hardware port due to overclocking. This is possible, but very, very rare. Though still possible. (maybe when u changed monitors you used another port/VGA-out)

 

-With the GTX780, it's actually possible to overclock your Monitor screen, which destroys it in some cases. Maybe you turned up the refresh rate accidentally, and by that, your monitor was burned out?

 

 

I suggest lowering your clocks, and trying out the old monitor in a different Port than the one you used the first time to ensure that it is still working.

I

I swaped the ports with the one of the monitor that worked but the dead monitor was still full of artifacts, so it had to be the monitor.

how could i have turned up the monitor refresh rate? 

Link to post
Share on other sites

No, they can easily be monitor problems. It's just a lot more rare.

 

So is it possible that the screen just died, due to some kind of screen failure? The chance that this would happen at the same time I was testing my overclock is SO small.... But on the other hand I cant understand how a benchmark can kill a screen it wasnt even benching on....

Link to post
Share on other sites

So is it possible that the screen just died, due to some kind of screen failure? The chance that this would happen at the same time I was testing my overclock is SO small.... But on the other hand I cant understand how a benchmark can kill a screen it wasnt even benching on....

Well, the benchmark was probably putting more stress on the screen than normal usage, since it probably had to change colors rapidly. I can't imagine an overclock damaging a monitor, though.

Link to post
Share on other sites

Well, the benchmark was probably putting more stress on the screen than normal usage, since it probably had to change colors rapidly. I can't imagine an overclock damaging a monitor, though.

 

But it was just a one-monitor benchmark which means that all the fancy graphics were just on the middle screen. on the other two screens was just the desktop, and the one with the desktop died, not the one I was actually putting stress on.... crazy thing ^^ I'm now unsure if I want to overclock again..

Link to post
Share on other sites

@Denoxx

 

to the best of my knowledge a bad gpu overclock can't actually destroy a monitor.

 

overclocking the monitor to high refresh rates can however cause adverse effects on the lifespan of the monitor.

there are some scenarios where gpu overclocking could kill a monitor,though they're mostly jokes.

 

ex.

you're overclocking your GTX 780 on a Dell OEM 400 watt power supply with no overvolt protection,after a while the power supply catches fire,burns your computer and then fire starts coming out of the vents on the side of your sidepanel that torch the display. 

Those dell psus are crazy, 80+ gold 300w. The thing is bloody heavier then a cx600 or cx750.

cpu: intel i5 4670k @ 4.5ghz Ram: G skill ares 2x4gb 2166mhz cl10 Gpu: GTX 680 liquid cooled cpu cooler: Raijintek ereboss Mobo: gigabyte z87x ud5h psu: cm gx650 bronze Case: Zalman Z9 plus


Listen if you care.

Cpu: intel i7 4770k @ 4.2ghz Ram: G skill  ripjaws 2x4gb Gpu: nvidia gtx 970 cpu cooler: akasa venom voodoo Mobo: G1.Sniper Z6 Psu: XFX proseries 650w Case: Zalman H1

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×