How to flash 780 TI using CMD

[PeezythePotato]

Hello, I am going to flash my 780 Ti BIOS with Skyn3t, and I have a few questions to make sure I'm on the right track.

 

I have an EVGA GeForce GTX 780 ti Superclocked running [80.80.34.00.80] Revision [b1], and I've downloaded the corresponding BIOS (exact BIOS version, revision [b1]), and I've placed both a copy of my original BIOS and the Skyn3t BIOS in the Nvflash folder but I am not 100% sure on what to do next.

 

 

According to a video I watched on flashing WITHOUT a USB stick, I need to:

1: Place both ROM's into the Nvflash folder

2: Open an elevated command prompt

3: Change the directory to the Nvflash folder

4: Use command [nvflash XXX.rom -4 -5 -6 ] to flash the BIOS

 

Now am I missing anything? Are there any tips I should know of? 

 

 

I have Nvflash v5.134

 

 

 

[FireFox]

Why is it you want to flash the BIOS?

[PeezythePotato]

Why is it you want to flash the BIOS?

 

Because my 780Ti is stable past 1300Mhz and I'm stuck at 1200Mhz due to the 106% power limit. All it does is throttle between 1178Mhz and 1215Mhz and it's very annoying so I want to increase my power limit to 300w or so