Software that logs GPU temps?

[TheMidnightNarwhal]

Troubleshooting that heat may cause laptop to crash so I need a program that saves temps that I can read even after a blue screen.

[Guest Philosophy]

I assume not in windows if it is blue screening? All of the overclock utlites record temps but I assume that is now wat you are looking for

[TheMidnightNarwhal]

I assume not in windows if it is blue screening? All of the overclock utlites record temps but I assume that is now wat you are looking for

 

Well I mean if the software can save automatically when laptop shuts down and I can read afterwards it's fine.

[SeanBond]

derp after a blue screen? I wouldn't have a clue. Sorry.

[ottavianus]

I would go for easy HWMonitor: http://www.cpuid.com/softwares/hwmonitor.html

for a general view and http://www.techpowerup.com/gpuz/ for more detailed information.

I do not know id they can save automatically however you shouldn't need it.

just run furmark or some intesive gpu benchmark looking at the temps and gpu usage.

Goodluck!!

[TheMidnightNarwhal]

I would go for easy HWMonitor: http://www.cpuid.com/softwares/hwmonitor.html

for a general view and http://www.techpowerup.com/gpuz/ for more detailed information.

I do not know id they can save automatically however you shouldn't need it.

just run furmark or some intesive gpu benchmark looking at the temps and gpu usage.

Goodluck!!

 

Yeah HWMonitor don't save the max after reset... I guess I will time in-game beore it crashes and time furmark before and crashe and see if there is a relation. Furmark would generate way more heat than arma 3 at 1080p at low, correct?

[Opcode]

GPU-Z will log temps, loads, etc.

 

[Archangel1994]

GPU-Z has an option "Log to file"

 

 

Bottom of the window

 

Edit: Ignore the 3 load numbers, they are on 0% all the time for some reason, even in valley

[ottavianus]

Yeah HWMonitor don't save the max after reset... I guess I will time in-game beore it crashes and time furmark before and crashe and see if there is a relation. Furmark would generate way more heat than arma 3 at 1080p at low, correct?

yeah, it will max out the gpu all the time creating the worst scenario possible.

[TheMidnightNarwhal]

yeah, it will max out the gpu all the time creating the worst scenario possible.

 

Ok.

[TheMidnightNarwhal]

GPU-Z will log temps, loads, etc.

 

 

GPU-Z has an option "Log to file"

 

 

Bottom of the window

 

Edit: Ignore the 3 load numbers, they are on 0% all the time for some reason, even in valley

 

 

Ok, so it logs em when program closes?

[Archangel1994]

Ok, so it logs em when program closes?

It saves data to the Log file every time the sensors refresh so in my clients case: Every 1 second while log to file is enabled

 

Edit: The log file will contain all the data from the sensors you see

[Opcode]

Ok, so it logs em when program closes?

It flushes its write output every interval (e.g. set sensor refresh rate). So it will log all the way up until the program dies. Which should be enough to give you an understanding of how hot the machine was right before the blue screen.

[TheMidnightNarwhal]

It saves data to the Log file every time the sensors refresh so in my clients case: Every 1 second while log to file is enabled

 

Edit: The log file will contain all the data from the sensors you see

 

It flushes its write output every interval (e.g. set sensor refresh rate). So it will log all the way up until the program dies. Which should be enough to give you an understanding of how hot the machine was right before the blue screen.

 

Ok thanks.