New Someone Help please!

[OscaRage]

Hi if someone can help me I will really Appreciate because I can`t figure it out! I have 4x2 GB of Corsair Ram both the SAME. Let`s say Ram A and Ram B they are working 100%

When I put Ram A in the 4TH Dimm the PC shuts down giving me a BSOD and repeat. When I put Ram B in the 4TH Dimm the PC Works and boots fine.

What can be the problem? The Rams are both the same . Bios is cleared no OC, voltage nothing. I can`t figure it out it`s driving me crazy. Both Same rams.

[Deli]

How do you know both sticks are 100% working? Try running Windows RAM diagnostic tool to see if there is any hidden problem.

[Method]

Need more info I think. 4x2gb meaning 4 sticks of 2GB? or 2 sticks of 4GB?

 

Also check the slots themselves. If you're only putting one stick in, and one slot works and the other doesn't, the board probably needs sticks in specific ram slots. Check your manual.

[OscaRage]

Hi.

 

I mean 4GB Each Corsair Vengeance.

 

I know that they are working 100% because I tried them on my father Computer Each Stick in each DIMM. I don`t have a clue what`s causing the problem. When I put the stick in the last DIM the PC won`t turn and start`s to freak out.

[iain]

I would run memtest 86 on both modules in the working socket.

[OscaRage]

Thank you for helping me guys!

Im going to run memtest and Il post an update ! Thank you.

[OscaRage]

Bump!

No errors Found during the memtest86 Total time was 1hr and 1 Pass.

 

Is it a faulty motherboard?

[LogicalDrm]

Bump!

No errors Found during the memtest86 Total time was 1hr and 1 Pass.

 

Is it a faulty motherboard?

 

Thats too little testing on Memtest. Try running it bit longer like 3-8h.

[Method]

Seriously just check your boards manual. It's likely picky at what slots you use

[OscaRage]

Just been messing around..

 

When I put the memory in the first slot and the other one in the third slot the memory goes dual channel which is causing my pc to shut down and bunch of BSOD.

When I put the memory in the first and second slot, single channel there are no problems.. I can`t figure it out.

[Litargirio]

What motherboard are you using?

[TrueWhiteWolf]

you need to provide the exact name of the motherboard for us to be a little more specific on help to give to you, if you have another pc with the same kind of ram compatibility or different ram jus try switching them around just see if it is the ram itself or if its the motherboard giving the issue and also give us that bsod code at the bottom of the screen 

[Litargirio]

Have you tried putting the RAM in slots #2 and #4 instead of #1 and #3? You might be just using the two wrong slots.

[OscaRage]

Hi, Yes I tried all Slots, 1-3 and 2-4 now im running 1-2 single channel its working fine but when i switch back to 1-3 or 2-4 it starts freaking out random BSOD, pc turning off and on by itself.

Mobo name : Gigabyte 970A DS3 Rev 3.0 .

Thank`s for helping me.

[dragoon20005]

Hi, Yes I tried all Slots, 1-3 and 2-4 now im running 1-2 single channel its working fine but when i switch back to 1-3 or 2-4 it starts freaking out random BSOD, pc turning off and on by itself.

Mobo name : Gigabyte 970A DS3 Rev 3.0 .

Thank`s for helping me.

see if you can test the RAM on another PC

 

if they work fine

 

I will point to mobo

[OscaRage]

Yes Ram is working fine even tested on 2 PC`s no bsod nothing . I think its the mobo.