I need help!

[tehonlykevin]

So i built this system last night and i did a post every thing turned on. So i came back to finish up some cable management and it wont stay on ( powers on for a split second and then turns off) I have checked and all of the cables are plugged in. What do i do??

 

Parts that were in this build:

PCPartPicker part list: http://ca.pcpartpicker.com/p/v9trwP

Price breakdown by merchant: http://ca.pcpartpicker.com/p/v9trwP/by_merchant/

 

CPU: Intel Core i5-4690K 3.5GHz Quad-Core Processor  (Purchased For $0.00) 

CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler  ($0.00) 

Motherboard: MSI Z97-G45 Gaming ATX LGA1150 Motherboard  (Purchased For $0.00) 

Memory: Kingston Fury Red Series 8GB (2 x 4GB) DDR3-1600 Memory  (Purchased For $0.00) 

Storage: Samsung 840 EVO 120GB 2.5" Solid State Drive  (Purchased For $0.00) 

Video Card: MSI GeForce GTX 760 2GB TWIN FROZR Video Card  (Purchased For $0.00) 

Case: NZXT H440 (Black/Red) ATX Mid Tower Case  (Purchased For $0.00) 

Power Supply: Corsair RM 650W 80+ Gold Certified Fully-Modular ATX Power Supply  (Purchased For $0.00) 

Case Fan: Corsair Air Series AF120 Performance Edition 63.5 CFM 120mm  Fan  (Purchased For $0.00) 

Case Fan: Corsair Air Series SP120 High Performance Edition (2-Pack) 62.7 CFM 120mm  Fans  (Purchased For $0.00) 

Case Fan: Corsair Air Series AF140 Quiet Edition 67.8 CFM 140mm  Fan  (Purchased For $0.00) 

Total: $0.00

Prices include shipping, taxes, and discounts when available

Generated by PCPartPicker 2014-10-14 20:37 EDT-0400

[TheInverseKey]

Bent pin?

[tengarp]

Check to see if all the components (ram, gpu, etc) are plugged in properly and re-plug in all of the power cables just to be sure they are all plugged in

[brob]

 

So i built this system last night and i did a post every thing turned on. So i came back to finish up some cable management and it wont stay on ( powers on for a split second and then turns off) I have checked and all of the cables are plugged in. What do i do??

 

...

 

 

Often this is caused by a cpu cooling failure. Check that the pump/interface assembly is securely mounted on the cpu. Verify that the radiator and pump are plugged in and getting power.

[tehonlykevin]

Often this is caused by a cpu cooling failure. Check that the pump/interface assembly is securely mounted on the cpu. Verify that the radiator and pump are plugged in and getting power.

Nope didn't work

[brob]

Nope didn't work

 

You might try clearing the CMOS - see the user manual for details. The process is run with no power to the motherboard so make sure that the psu is turned off on the back.