Jump to content

Hey Guys,

 

I recently installed a H100i cooler on my 4790k and I think I may have applied too much paste. My room ambient temps is around 78F, and I am getting around 47-48 Degree "Celcius" when doing normal work/browsing on my computer. I have a Enthoo Luxe case with the front 200m and bottom 140mm as intake. H100i and rear 140 is set up as exhaust.

 

Is 47-48 C under normal use acceptable? If not, I think I am going to repaste my cpu. Any good recommendation of good thermal paste is also appreciated. 

 

 

Thank You

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/
Share on other sites

Link to post
Share on other sites

If your CPU is OVERCLOCKED BALLS TO THE WALLS, then this a a bit above normal, not much. If you want good paste, choose this one:

http://www.amazon.com/Innovation-Cooling-Diamond-Thermal-Compound/dp/B0042IEVD8/ref=sr_1_2?ie=UTF8&qid=1412278048&sr=8-2&keywords=ic+diamond

Linus himself loves it

Are you new to the forums???? read the Code of Conduct HERE WANT SOME AWESOME LTT THEMED WALLPAPERS??? check out XTanksSlayerX's wallpaper thread HERE 

"May our framerates be high, and our temperatures low" - PC MasterRace

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3100982
Share on other sites

Link to post
Share on other sites

The pre applied paste was fine..

 

My unit for some odd reason didn't have preapplied paste. So I manually applied some and I think I suck at applying paste haha. The first hour/two hours the system was at great temps 30-33C but then three hours later it's averaging 45-50. Under the same load.

 

 

If your CPU is OVERCLOCKED BALLS TO THE WALLS, then this a a bit above normal, not much. If you want good paste, choose this one:

http://www.amazon.com/Innovation-Cooling-Diamond-Thermal-Compound/dp/B0042IEVD8/ref=sr_1_2?ie=UTF8&qid=1412278048&sr=8-2&keywords=ic+diamond

Linus himself loves it

 

I am on Stock, haven't OCed yet. 

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3100997
Share on other sites

Link to post
Share on other sites

Hey Guys,

 

I recently installed a H100i cooler on my 4790k and I think I may have applied too much paste. My room ambient temps is around 78F, and I am getting around 47-48 Degree "Celcius" when doing normal work/browsing on my computer. I have a Enthoo Luxe case with the front 200m and bottom 140mm as intake. H100i and rear 140 is set up as exhaust.

 

Is 47-48 C under normal use acceptable? If not, I think I am going to repaste my cpu. Any good recommendation of good thermal paste is also appreciated. 

 

 

Thank You

 

thats a little warm but then you are in florida.

 

try making the radiator an intake, and see if it makes a difference,

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3101002
Share on other sites

Link to post
Share on other sites

My unit for some odd reason didn't have preapplied paste. So I manually applied some and I think I suck at applying paste haha. The first hour/two hours the system was at great temps 30-33C but then three hours later it's averaging 45-50. Under the same load.

 

 

 

I am on Stock, haven't OCed yet. 

damn, if its at stock speeds, ya thats bad......

 

but you are in florida...... i suggest crank up the AC in your house?

Are you new to the forums???? read the Code of Conduct HERE WANT SOME AWESOME LTT THEMED WALLPAPERS??? check out XTanksSlayerX's wallpaper thread HERE 

"May our framerates be high, and our temperatures low" - PC MasterRace

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3101003
Share on other sites

Link to post
Share on other sites

What really matters are the "under load" temperatures... and why would you give the room temperature in Fahrenheit and the CPU temperature in Celsius lol.

Also, how much paste do you call too much? Did you put an olive worth of paste or just a corn seed?

 

It's probably nothing to worry.

CPU: Intel Core i7-4790k | CPU Cooler: Noctua NH-D15 | Motherboard: ASUS Sabertooth Z97 MARK 1 | Memory: Kingston HyperX FURY 16GB 1866MHz | GPU: Gigabyte GeForce GTX 770 4GB Windforce


Storage: Samsung 840 EVO | PSU: CM Silent Pro 720W | Case: Phanteks Enthoo Luxe | Headset: Corsair Vengeance 2100 | Keyboard: Logitech G710+ | Mouse: Razer DeathAdder Chroma


"You see, one can only be angry with those he respects." - R. Nixon

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3101027
Share on other sites

Link to post
Share on other sites

Hey Guys,

 

I recently installed a H100i cooler on my 4790k and I think I may have applied too much paste. My room ambient temps is around 78F, and I am getting around 47-48 Degree "Celcius" when doing normal work/browsing on my computer. I have a Enthoo Luxe case with the front 200m and bottom 140mm as intake. H100i and rear 140 is set up as exhaust.

 

Is 47-48 C under normal use acceptable? If not, I think I am going to repaste my cpu. Any good recommendation of good thermal paste is also appreciated. 

 

 

Thank You

use that 140 on the bottom as an exhaust at the top i beg you the 200mm fan in the front is more than adequate i have the same case trust me 

CPU: R9 5900X----GPU: RX 7900 XTX ------MOBO: ROG X570E-------RAM: CORSAIR VENGANCE 32GB-------PSU: SEASONIC 1000W-------CASE: LIAN LI O11D XL ROG

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3101192
Share on other sites

Link to post
Share on other sites

The problem is your H100i.  It has a really bad mounting problem, and it doesn't always make proper contact with the CPU. 

 

Here are a few links regarding the subject:

Read Posts #1 & #3

Corsair Forum's Washer Mod

cm6m.jpg

 

Its not a good product.  I never recommend this cooler, and I tell people to stay away from it because it is not guaranteed to work for everyone out of the box.

"I genuinely dislike the promulgation of false information, especially to people who are asking for help selecting new parts."

Link to comment
https://linustechtips.com/topic/226382-h100i-4790k/#findComment-3101637
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×