PCIE case back plate stuck

[Surfer72]

Its attached on, how do i remove this?

[RelentlessAF]

Bend it up and down until it snaps off.

[antoainb]

Have you tried using a hammer to punch something and remove it?

[IdeaStormer]

Wiggle wiggle wiggle wiggle wiggle, pops off. Don't pull bend twist or yank, unless you want to cut yourself or break if off badly so a card won't fit properly. Might want to file off the metal tab left after the wiggling or it might haunt you another day when you unforgettably rub your finger/hand over it and cut yourself and bleed all over your computer.

 

Wiggle it as if it is a hinge and the spots that are still attached are the hinge.

 

If I were you I'd remove them all while your at it and either leave it naked or get some PCIe slot covers from a friend or junk pile if you want the covered look and use the screw to hold them down, don't leave the card or slot covers just dangling.

[terrytek]

Whoa, you got those cheap ghetto cases. Just rip it off.

[Surfer72]

got it but now theres a new problem il make another post