Jump to content

Adapt Intel memory for AMD

Afkward
By Afkward
in Troubleshooting
 Share
Posted

TL;DR: Intel CPU dead, switched to AMD, have RAM adapted for Intel, how to adapt it for AMD via settings? DOCP not working.

 

Please see attached image. My PC specs are there.

 

I switched from Intel 13900K to AMD 7950x3d because Intel stopped working because of degradation (CPU was defective from start).

 

Can't understand materials about manual overclocking of RAM for AMD. Can someone write settings for me? I can pay in bitcoins!

 

 

PC Specs.png

Link to comment
https://linustechtips.com/topic/1600485-adapt-intel-memory-for-amd/
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, Afkward said:

DOCP not working.

DOCP clocks at 7600Mhz? Ryzen isn't that easy to clock past 6000Mhz for RAM

Note: Users receive notifications after Mentions & Quotes. 

Feel free: To ask any question, no matter what question it is, I will try to answer. I know a lot about PCs but not everything.

current PC:

Ryzen 5 5600 |16GB DDR4 3200Mhz | B450 | GTX 1080 ti [further details on my profile]

PC configs I used before:

  1. Pentium G4500 | 4GB/8GB DDR4 2133Mhz | H110 | GTX 1050
  2. Ryzen 3 1200 3,5Ghz / OC:4Ghz | 8GB DDR4 2133Mhz / 16GB 3200Mhz | B450 | GTX 1050
  3. Ryzen 3 1200 3,5Ghz | 16GB 3200Mhz | B450 | GTX 1080 ti
Link to post
Share on other sites
Posted
5 minutes ago, Afkward said:

TL;DR: Intel CPU dead, switched to AMD, have RAM adapted for Intel, how to adapt it for AMD via settings? DOCP not working.

 

Please see attached image. My PC specs are there.

 

I switched from Intel 13900K to AMD 7950x3d because Intel stopped working because of degradation (CPU was defective from start).

 

Can't understand materials about manual overclocking of RAM for AMD. Can someone write settings for me? I can pay in bitcoins!

 

 

PC Specs.png

What happens when you enabled XMP / DOCP ?

 

Your RAM is 7600Mhz and getting it to work on AM5 is almost impossible at that speed.

Manually try to set them to 6000Mhz if possible.

 

By the looks of it your RAM is already running at 7600Mhz.

Link to post
Share on other sites
Posted

Your RAM is already running at 7600mt/s at its advertised speeds. You dont have to do anything, though I have some doubts if its actually stable.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18! jellYfIn Client siDE TRanscoDinG

Link to post
Share on other sites
Posted
  • Author
31 minutes ago, Levent said:

Your RAM is already running at 7600mt/s at its advertised speeds. You dont have to do anything, though I have some doubts if its actually stable.

It is stable! Really!

 

30 minutes ago, Hinjima said:

What happens when you enabled XMP / DOCP ?

 

Boot fails. I have to remove battery from motherboard for PC to start correctly.

Link to post
Share on other sites
Posted

Welcome to the forums!
Go into your BIOS, find memory settings. There should be a dropdown of presets there. Find the one that says 6000 speed. Select it. 

5950X/4090FE primary rig  |  1920X/1070Ti Unraid for dockers  |  200TB TrueNAS w/ 1:1 backup

Link to post
Share on other sites
Posted
43 minutes ago, Afkward said:

Can't understand materials about manual overclocking of RAM for AMD. Can someone write settings for me? I can pay in bitcoins!

Gskill is making AMD expo/docp enabled RAM too. I'd check the specs of comparable sticks to the ones you are using and copy the settings of the expo/docp settings of that RAM. You can usually find those timings on the manufacturer's website.

Hope that helps

Link to post
Share on other sites
Posted
57 minutes ago, Levent said:

Your RAM is already running at 7600mt/s at its advertised speeds. You dont have to do anything, though I have some doubts if its actually stable.

It certainly runs at Gear2 (or worse), so is slower than a manually set 6000CL30 (or 36 if it don't post at CL30)

@Afkward pls use Zentimings to show us full RAM parameters (mine below as an example, they're "standard target" AM5 timings )

 

image.png.6b640aa3be667f5afc87082116a1feb8.png

 

AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM / ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Arctic Liquid Freezer III 360 ARGB cooler/  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU/ Alienware AW3420DW 34" 120Hz 3440x1440p monitor / ASUS ROG AZOTH keyboard/ Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to post
Share on other sites
Posted
1 hour ago, Afkward said:

Boot fails. I have to remove battery from motherboard for PC to start correctly.

yes, removing battery wipes BIOS and resets settings, that includes RAM XMP/EXPO

Note: Users receive notifications after Mentions & Quotes. 

Feel free: To ask any question, no matter what question it is, I will try to answer. I know a lot about PCs but not everything.

current PC:

Ryzen 5 5600 |16GB DDR4 3200Mhz | B450 | GTX 1080 ti [further details on my profile]

PC configs I used before:

  1. Pentium G4500 | 4GB/8GB DDR4 2133Mhz | H110 | GTX 1050
  2. Ryzen 3 1200 3,5Ghz / OC:4Ghz | 8GB DDR4 2133Mhz / 16GB 3200Mhz | B450 | GTX 1050
  3. Ryzen 3 1200 3,5Ghz | 16GB 3200Mhz | B450 | GTX 1080 ti
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×