Pc crashed and doesnt start anymore

[augustonogs27]

I was using my computer, it froze and wouldn't accept any commands. I turned it off through the PSU and left it there. After that it didn't turn on anymore. I've tested a different psu, I've changed the power cable, I've tested taking out a memory stick and putting it in different positions, I've tested a different gpu.
It turns on the CPU light, goes to the DRAM light and stays on them for about 10 seconds, and when it goes to the GPU light it stays on for about 2 seconds and restarts, after that it alternates between the CPU and DRAM light.
but at no time does it show video

the build
Gigabyte b760m e
i5 12400f
24gb kingston fury 5600mhz ddr5
gtx 1660 oc gaming
psu cooler master elite nex w600

[DoctorNick]

58 minutes ago, augustonogs27 said:

I was using my computer, it froze and wouldn't accept any commands. I turned it off through the PSU and left it there. After that it didn't turn on anymore. I've tested a different psu, I've changed the power cable, I've tested taking out a memory stick and putting it in different positions, I've tested a different gpu.
It turns on the CPU light, goes to the DRAM light and stays on them for about 10 seconds, and when it goes to the GPU light it stays on for about 2 seconds and restarts, after that it alternates between the CPU and DRAM light.
but at no time does it show video

the build
Gigabyte b760m e
i5 12400f
24gb kingston fury 5600mhz ddr5
gtx 1660 oc gaming
psu cooler master elite nex w600

Ok so you got mismatched ram? (24gb) Try with one ram stick in the first port (left). If it works with one of the sticks, buy a new kit. 

[kitnoman]

17 minutes ago, DoctorNick said:

Ok so you got mismatched ram? (24gb) Try with one ram stick in the first port (left). If it works with one of the sticks, buy a new kit. 

he probably got a single stick 24gb dd5.
 

1 hour ago, augustonogs27 said:

I was using my computer, it froze and wouldn't accept any commands. I turned it off through the PSU and left it there. After that it didn't turn on anymore. I've tested a different psu, I've changed the power cable, I've tested taking out a memory stick and putting it in different positions, I've tested a different gpu.
It turns on the CPU light, goes to the DRAM light and stays on them for about 10 seconds, and when it goes to the GPU light it stays on for about 2 seconds and restarts, after that it alternates between the CPU and DRAM light.
but at no time does it show video

the build
Gigabyte b760m e
i5 12400f
24gb kingston fury 5600mhz ddr5
gtx 1660 oc gaming
psu cooler master elite nex w600

If it alternates between cpu and dram and then restarts, can you tell me if you tried to just leave it on? and if you did, for how long?

Have you also tried removing the cmos battery? Have you tried to reseat the cpu? was it possible that you accidentally bumped or shook your table/desk/computer before it froze?