Jump to content

How to buy specific ribbon cables

da na
Go to solution Solved by OhYou_,

couple of key words
"ffc" the white cable with blue end things
"pitch" the measurement in mm from center of contact to center of next contact
"pin" amount of pins


so "ffc 0.5mm pitch 9 pin"

thats like 80% to what you need

im assuming if its 9 pins and 10mm wide its probably 0.5mm pitch, heres one listing that offers that in various lengths. you probably want to verify the pitch tho
https://www.aliexpress.us/item/3256806568124167.html

I know this is a bit of an odd question but does anyone know of a website that sells generic ribbon cables? Like, with a dropdown to select the cable width, length, and number of pins, and it'd give a list of cables? 

I need a specific 9-pin cable for my HP DV6 laptop's touch bar, the OEM cable is selling for $16 on eBay and I would love to not pay anywhere near that much. But I don't know what to look for. It already took long enough to find that exact HP cable, I don't know where to even begin searching for a cheaper alternative - what do I even look up? "1cm width 9 pin cable"? Unfortunately the OEM cable does not have a part number or manufacturer listed.

If anyone knows of resources I could use, it would be greatly appreciated. 

Link to comment
Share on other sites

Link to post
Share on other sites

couple of key words
"ffc" the white cable with blue end things
"pitch" the measurement in mm from center of contact to center of next contact
"pin" amount of pins


so "ffc 0.5mm pitch 9 pin"

thats like 80% to what you need

im assuming if its 9 pins and 10mm wide its probably 0.5mm pitch, heres one listing that offers that in various lengths. you probably want to verify the pitch tho
https://www.aliexpress.us/item/3256806568124167.html

Link to comment
Share on other sites

Link to post
Share on other sites

Posted (edited)
41 minutes ago, OhYou_ said:

couple of key words
"ffc" the white cable with blue end things
"pitch" the measurement in mm from center of contact to center of next contact
"pin" amount of pins

 

thats like 80% to what you need

im assuming if its 9 pins and 10mm wide its probably 0.5mm pitch, heres one listing that offers that in various lengths. you probably want to verify the pitch tho
https://www.aliexpress.us/item/3256806568124167.html

Thank you so much!

The cable is indeed 1CM.

The middle of each pin lines up with the millimeter marks on the ruler.

image.png.8ed1924b33167f1f9856798b79e94397.png

1MM pitch since the space between pins is 1MM.

Edited by da na
Corrected pitch.
Link to comment
Share on other sites

Link to post
Share on other sites

If anyone in the future needs the touch bar/button board/media button cable for the HP Pavilion DV4, DV5, DV6, DV2000, DV3000, DV6000, DV9000, HDX 16, HDX 18 and HDX 9300 from between 2006 and 2010, you need:

-10cm/100mm length

-9 pins

-1mm pitch

-Reverse side 

I purchased this https://www.ebay.com/itm/253935636526?

Link to comment
Share on other sites

Link to post
Share on other sites

21 minutes ago, da na said:

Thank you so much!

The cable is indeed 1CM.

The middle of each pin lines up with the millimeter marks on the ruler.

image.png.8ed1924b33167f1f9856798b79e94397.png

I think that looks like 0.5mm pitch since the space between them is about half a millimeter. Would you agree? 

That's 1mm pitch, since it's 1mm between the center of pins.

There is approximately 99% chance I edited my post

Refresh before you reply

__________________________________________

ENGLISH IS NOT MY NATIVE LANGUAGE, NOT EVEN 2ND LANGUAGE. PLEASE FORGIVE ME FOR ANY CONFUSION AND/OR MISUNDERSTANDING THAT MAY HAPPEN BECAUSE OF IT.

Link to comment
Share on other sites

Link to post
Share on other sites

29 minutes ago, da na said:

Oh I see! Thank you

Example :

 

https://www.amazon.com/uxcell-1-0mm-Pitch-Flexible-Cable/dp/B016CVJY1G

image.png.7da41cedaf331c50092004e79d4b50bd.png

 

https://www.ebay.com/itm/253935636526

Much cheaper (If you need less than 20)

And have options for various length and orientation.

There is approximately 99% chance I edited my post

Refresh before you reply

__________________________________________

ENGLISH IS NOT MY NATIVE LANGUAGE, NOT EVEN 2ND LANGUAGE. PLEASE FORGIVE ME FOR ANY CONFUSION AND/OR MISUNDERSTANDING THAT MAY HAPPEN BECAUSE OF IT.

Link to comment
Share on other sites

Link to post
Share on other sites

oh oops i derped yeah 1mm pitch not 0.5mm lol
looks good

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×