TrueNAS Scale BadDLLP error

[FuchsFuchs1]

I have a self made nas ans installed truenas on it but it keeps trowing errors.

 

Specs: 
Motherboard: Gigabyte MJ11-EC1
CPU: AMD EPYC 3151(Embed)
RAM: 32GB DDR4 2666MHz

I also have a a M.2 to 5x SATA adapter.

[m9x3mos]

It sounds like there is a communication issue with something on the pci bus based on that error. 

If I had to guess, it might be a signaling thing to that adapter. 

Can you try and not it without the adapter to see if the error goes away? 

[FuchsFuchs1]

On 3/10/2024 at 5:10 PM, m9x3mos said:

It sounds like there is a communication issue with something on the pci bus based on that error. 

If I had to guess, it might be a signaling thing to that adapter. 

Can you try and not it without the adapter to see if the error goes away? 

That would be very problematic for my setup since I don't have engouth planned sata ports then...

I'll try it later(I'm not home now)

[FuchsFuchs1]

On 3/10/2024 at 5:10 PM, m9x3mos said:

It sounds like there is a communication issue with something on the pci bus based on that error. 

If I had to guess, it might be a signaling thing to that adapter. 

Can you try and not it without the adapter to see if the error goes away? 

after removing it its now stuck in a boot loop. i cant even enter setup...