HDD and RAM issues

[LoG31]

Hi everyone, forst post for me,i just tryed to put more ssd and HDD in my systeme but one HDD isn't showing up, i tryed new sats cable and sats alim, nothing, i have an  MSI Tomahawk max II, i also have a problem with the RAM, but i think that the slot is dead so im on 8 GB ram now, when i was on 2X8 GB befor but now if i plug the second ram in the Slot 4, the computer wont start, i did update de BIOS in case of but nothing,

If anyone can help me on that i'll be really thanksfull.

 

BTW, sorry for my English, im from France and i think that my english is not that good. 

 

Have a good day all

[YoungBlade]

In the manual, it shows that SATA ports 5 and 6 are disabled when an M.2 drive is installed. This is likely the reason your HDD isn't showing up. You can try moving it to a different SATA port.

 

For the RAM, it could be a dead slot, a dead memory stick, or a dead memory channel on the CPU's memory controller. You'd need to do more troubleshooting to figure out which that is. If more than one slot associated with the same channel can't recognize either stick, I would think that it's the CPU's memory controller.

[PDifolco]

13 minutes ago, LoG31 said:

Hi everyone, forst post for me,i just tryed to put more ssd and HDD in my systeme but one HDD isn't showing up, i tryed new sats cable and sats alim, nothing, i have an  MSI Tomahawk max II, i also have a problem with the RAM, but i think that the slot is dead so im on 8 GB ram now, when i was on 2X8 GB befor but now if i plug the second ram in the Slot 4, the computer wont start, i did update de BIOS in case of but nothing,

If anyone can help me on that i'll be really thanksfull.

 

BTW, sorry for my English, im from France and i think that my english is not that good. 

 

Have a good day all

Hello compatriote

Tu vois le HDD dans le BIOS ou pas du tout ? Si tu ne le voit pas soit il est mal branché soit il est HS

Pour la RAM, mets le stick qui marche dans le slot qui pose problème, si ça marche c'est le stick qu'il faut changer, sinon c'est la CM...

[LoG31]

Hello, many thank's for your answer, for the HDD i got the answer then, for the memory ram, i think it is the slot cause when i try the stick on the others slot, it work, i'll try with an other procesor to see if it work or not

 

Many thanks for your help

[LoG31]

9 hours ago, PDifolco said:

Hello compatriote

Tu vois le HDD dans le BIOS ou pas du tout ? Si tu ne le voit pas soit il est mal branché soit il est HS

Pour la RAM, mets le stick qui marche dans le slot qui pose problème, si ça marche c'est le stick qu'il faut changer, sinon c'est la CM...

Salut haha, pour le HDD c'est parce que j'ai un MVE donc ça coupe les port 5 et 6, pour la ram, le stick est bon, je vais tester avec un autre processeur et je serais fixé, meme si je pense que c'est la CM

 

Merci pour ton aide

[PDifolco]

2 minutes ago, LoG31 said:

Salut haha, pour le HDD c'est parce que j'ai un MVE donc ça coupe les port 5 et 6, pour la ram, le stick est bon, je vais tester avec un autre processeur et je serais fixé, meme si je pense que c'est la CM

 

Merci pour ton aide

Ok, j'avais pas fait attention à ta CM, en effet sur un vieux B450 faut choisir !

Sinon pour la RAM utilise les slots 1 et 3 au lieu de 2 et 4, si le 2 (ou le 4) est pété, c'est mieux que d'avoir que 8GB  

[LoG31]

Hello everyone, so, the probleme comes from the MB so, im on my way to change it haha, got a shortcut but still dont know how

New graphic card aswell and some RAM, many thanks to you guys, have a great day