Cloning SSD caused MEMORY_FAILURE?

[Potatodood]

Hello, so basically i got a new 2TB ssd, wanted to make it my new main so i cloned (biggest mistake) everything from my old 500GB to 2TB, no problems. However, when I tried to boot from the new ssd it kept crashing, MEMORY_FAILURE. so I tried booting from the old one, same thing happened. Removed all other drives except 500gb and these errors kept happening like MEMORY_FAILURE, Driver overstack run etc. So I tried resetting the drive but it physically got stuck at 8% for more than an hour, after this as a last resort I removed one of the memory sticks and boom, it worked. The system was now stable, however, I am unable to stick a second stick back in now. Whenever I do so, regardless of the slot, it crashes within a minute. I've even swapped the ram sticks and have found out that the ram sticks, individually, are both working fine just together they don't work. It's been only 3 weeks since I built this PC and they were working perfectly till then. I do have MCR enabled as well but disabled EXPO for the meantime. Any help please?

I'm thinking of reinstalling windows to see if that's the problem.

List of parts:

 

PCPartPicker Part List: https://ca.pcpartpicker.com/list/CLDRz6

CPU: AMD Ryzen 7 7700X 4.5 GHz 8-Core Processor  ($398.98 @ Amazon Canada) 
CPU Cooler: Thermalright Peerless Assassin 120 SE WHITE ARGB 66.17 CFM CPU Cooler 
Motherboard: MSI MAG B650 TOMAHAWK WIFI ATX AM5 Motherboard  ($269.99 @ Amazon Canada) 
Memory: TEAMGROUP T-Force Delta RGB 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory  ($157.96 @ Newegg Canada) 
Storage: Western Digital Blue SN550 500 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive  ($86.11 @ Amazon Canada) 
Storage: Crucial P5 Plus 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive  ($219.99 @ Amazon Canada) 
Video Card: Sapphire PURE Radeon RX 7800 XT 16 GB Video Card  ($748.97 @ Newegg Canada) 
Case: Phanteks Eclipse P400A Digital ATX Mid Tower Case  ($179.98 @ Newegg Canada) 
Power Supply: Corsair RM850x (2021) 850 W 80+ Gold Certified Fully Modular ATX Power Supply  ($149.99 @ Amazon Canada) 
Case Fan: Thermalright TL-C12C-S 66.17 CFM 120 mm Fans 3-Pack  ($46.55 @ Amazon Canada) 

 

Thanks.

[Yua]

Most probably, it's corrupted data from the cloning. While it works, back up the data you want to keep, and then perform a clean installation of Windows on the 2 TB drive.

[Kilrah]

Cloning or Windows won't have anything to do with it but it seems your system is unstable, maybe bad RAM, bad port, improperly seated CPU,...

Also I wouldn't trust the clone made with such issues, would recommend cloning again once the hardware is stable.